Join 60,000+ competitive exam aspirants
Location of a surge tank in a hydro-electric power station is near
Turbine
Tail race
Reservoir
Dam
Turbine
A surge tank is placed near the turbine in a hydro-electric power plant to act as a buffer against water hammer effects. It maintains pressure stability in the penstock during sudden load changes by providing a small reservoir to absorb or supply water as needed.
A surge tank is placed near the turbine in a hydro-electric power plant to act as a buffer against water hammer effects. It maintains pressure stability in the penstock during sudden load changes by providing a small reservoir to absorb or supply water as needed.
hwтАЛ=gLтАЛтЛЕdtdvтАЛ тАФ expression for water hammer pressure head rise where L is penstock length.
When the turbine load changes suddenly, the gate mechanism changes flow velocity abruptly. This creates a pressure wave, known as water hammer, which can rupture the long penstock. The surge tank absorbs the excess energy of this wave by allowing the water level to rise or fall, thereby protecting the pipeline.
Reduces the severity of water hammer effect.
Serves as a temporary reservoir during sudden increase in load.
Allows for reduction of penstock length requirements.
Prevents oscillations in the penstock velocity.
Protects the penstock from bursting due to pressure surges.
Improves turbine governing stability.
Acts as an auxiliary storage for rapid demand changes.
Increased construction and maintenance cost.
Requires precise hydraulic design for stability.
High and medium head hydro power plants.
Plants with long penstocks.
The surge tank should be located as close to the turbine as possible to maximize the effectiveness of pressure relief.
Option B (Tail race) is incorrect as it is the discharge channel for used water.
Option C (Reservoir) and D (Dam) are far upstream and do not mitigate penstock transients.
A is correct тАФ The surge tank is placed near the turbine to mitigate pressure surges caused by sudden fluctuations in water flow.
Always remember that in hydraulic circuits, surge tanks behave similarly to capacitors in electrical circuits, storing energy (fluid) to smooth out transients.