Join 60,000+ competitive exam aspirants
The inductance per unit length of an overhead line due to internal flux linkages
Depends on the size of the conductor
Is independent of the size of conductor and constant
Depends on the current through the conductor
Depends on distance between conductors
Is independent of the size of conductor and constant
The internal inductance of a solid cylindrical conductor is independent of its radius and material permeability, provided the permeability is constant across the cross-section. It is a fundamental property determined by the distribution of magnetic flux within the conductor volume.
The internal inductance of a solid cylindrical conductor is independent of its radius and material permeability, provided the permeability is constant across the cross-section. It is a fundamental property determined by the distribution of magnetic flux within the conductor volume.
LintтАЛ=8╧А╬╝0тАЛтАЛ┬аH/m тАФ Internal inductance of a solid round conductor
╬╝0тАЛ=4╧А├Ч10тИТ7┬аH/m тАФ Permeability of free space
As current flows through a cylindrical conductor, magnetic flux is produced both within the conductor (internal flux) and outside it (external flux). Using Ampere's Circuital Law, the flux density at a radius r inside the conductor is calculated; integrating the flux linkages over the conductor cross-section reveals that the internal inductance per unit length is always 8╧А╬╝0тАЛтАЛ Henry per meter for a non-magnetic conductor.
Internal inductance value is exactly 50├Ч10тИТ9┬аH/m for non-magnetic conductors.
The result is derived from the assumption of uniform current distribution within the conductor.
Internal inductance does not change with conductor size because the flux linkages per unit current decrease at the same rate as the conductor geometry changes.
The calculation relies on Ampere's law applied to the cross-sectional area.
Simplifies transmission line parameter calculations by treating internal inductance as a constant.
Facilitates easier estimation of the Geometric Mean Radius (GMR) of conductors.
Assumes uniform current density, which is not strictly true at high frequencies due to the skin effect.
Requires adjustment for stranded conductors where the internal magnetic flux linkage is zero.
Calculation of total inductance in high-voltage power transmission lines.
Designing parameters for overhead power cables.
Since ╬╝0тАЛ=4╧А├Ч10тИТ7┬аH/m, the value simplifies to 0.5├Ч10тИТ7┬аH/m or 0.05┬аmH/km.
Options A, C, and D are incorrect because the internal flux linkage geometry remains proportionally similar as the conductor size scales, cancelling out the radius variable.
B is correct тАФ The internal inductance per unit length of a solid cylindrical conductor is a constant value of 8╧А╬╝0тАЛтАЛ H/m, regardless of the conductor's radius.
Always remember that while total inductance depends on distance between conductors (external inductance), internal inductance specifically remains constant at 0.05┬аmH/km for solid wires.