Join 60,000+ competitive exam aspirants
The low power factor of an industrial plant is uneconomical for
Electric supply utility only
Owner of the plant only
Both (a) and (b)
Neither (a) or (b)
Both (a) and (b)
Low power factor (PF) is uneconomical because it increases the current drawn by the load for a given real power, leading to higher I┬▓с┤┐ losses and voltage drops. This penalizes the utility due to increased distribution losses and capacity exhaustion, while it penalizes the plant owner through low-PF penalties and higher billing costs.
Low power factor (PF) is uneconomical because it increases the current drawn by the load for a given real power, leading to higher I┬▓с┤┐ losses and voltage drops. This penalizes the utility due to increased distribution losses and capacity exhaustion, while it penalizes the plant owner through low-PF penalties and higher billing costs.
P=VIcos╧Х тАФ relationship between power and power factor
I=Vcos╧ХPтАЛ тАФ dependency of current on power factor for a given load
The apparent power is given by S=P+jQ, where P is real power and Q is reactive power. For a constant P, as power factor cos╧Х decreases, the reactive power Q increases, leading to a higher apparent power S. Consequently, the current I=VSтАЛ rises. This increased current causes higher thermal losses in transmission lines and transformers (PlossтАЛ=I2R), necessitating larger conductor sizes and equipment ratings to deliver the same useful power.
Low PF increases the kVA rating of equipment required, increasing capital cost.
Utilities impose penalties for PF below a threshold (typically 0.85-0.90) to discourage reactive power demand.
Power factor improvement is typically achieved by installing capacitor banks parallel to the inductive load.
Excessive current causes voltage regulation issues at the customer end.
Reduces transmission and distribution losses
Increases the effective capacity of existing equipment
Improves voltage regulation at the load terminal
Increased capital expenditure for power factor correction equipment
Potential for over-correction leading to leading power factor (voltage rise)
Industrial motor installations
Power distribution substations
Heavy manufacturing plants
Option A: Utility suffers from increased losses and reduced capacity utilization.
Option B: Owner suffers from penalties on electricity bills and increased I┬▓с┤┐ losses in internal wiring.
C is correct тАФ The low power factor negatively impacts both the electrical utility (via increased losses and capacity constraints) and the consumer (via penalty charges and internal efficiency losses).
Always remember that P is constant for a machine; if PF drops, the reactive component of the current must rise to satisfy the magnetizing requirements of inductive loads.