Join 60,000+ competitive exam aspirants
The non uniform distribution of voltage across the units in a string of suspension type insulator is due to
Unequal self-capacitance of the unit
Non-uniform distance of separation of the units from the tower body
Existence of stray capacitance between metallic junction of the units and tower body
Non uniform distance between the cross arms and the units
Existence of stray capacitance between metallic junction of the units and tower body
In a string of suspension insulators, the voltage distribution is non-uniform because the charging currents are not equal across all units. This happens because the metallic junctions of the insulators act as capacitor plates relative to the grounded tower structure, creating stray capacitance.
In a string of suspension insulators, the voltage distribution is non-uniform because the charging currents are not equal across all units. This happens because the metallic junctions of the insulators act as capacitor plates relative to the grounded tower structure, creating stray capacitance.
I=Im+Is — total charging current in a unit
Vline=∑Vi — total voltage across the string
String Efficiency=n×VoltageacrosstheunitnearesttotheconductorTotalVoltage×100
Each insulator unit has a mutual capacitance (C) between its metal pins and an associated stray capacitance (Cs) to the grounded tower. Due to these stray capacitances, the charging current flowing through the top unit (closest to the transmission line) is greater than the current through lower units. Consequently, the voltage drop across the unit closest to the line is the highest, leading to an uneven distribution.
The unit closest to the transmission line experiences the highest voltage stress.
The unit closest to the cross-arm (tower) experiences the lowest voltage stress.
String efficiency is always less than 100% due to this non-uniformity.
Increasing the number of units decreases the string efficiency.
Higher reliability for high voltage transmission lines
Easy to replace individual damaged discs
Requires grading rings or guard rings for voltage equalization
Susceptible to uneven aging of dielectric materials
High voltage overhead AC transmission lines (typically above 33kV)
Substation bus-bar support
Voltage distribution becomes uniform if stray capacitance is zero (Cs=0).
Grading rings increase the capacitance of lower units to balance the voltage distribution.
Option B and D refer to physical geometry which does not directly dictate the electromagnetic induction mechanism (capacitance) described by the stray coupling.
C is correct — The existence of stray capacitance creates unequal shunt charging currents, forcing an uneven potential gradient across the insulator string.
To improve string efficiency in practice, use a grading ring (guard ring) which increases the capacitance of the bottom units to counteract the effect of stray capacitance.