Join 60,000+ competitive exam aspirants
The soil has a liquid limit of 50% and plastic limit of 25%, respectively. If the volumetric shrinkages at the liquid limit and plastic limit are 50% and 30%, respectively, determine the dry volume of soil, if the volume at liquid limit is 1 ml.
0.485 ml
0.895 ml
0.667 ml
0.234 ml
0.667 ml
The dry volume of soil (VdтАЛ) can be determined using the shrinkage definition where volumetric shrinkage (VS) at a state of water content (w) is given by VS=VdтАЛVwтАЛтИТVdтАЛтАЛ├Ч100%. Given VSLLтАЛ=50% and VLLтАЛ=1 ml, we solve for VdтАЛ using the relationship between shrinkage and specific volume.
IS 2720 (Part 6): 1972
The dry volume of soil (VdтАЛ) can be determined using the shrinkage definition where volumetric shrinkage (VS) at a state of water content (w) is given by VS=VdтАЛVwтАЛтИТVdтАЛтАЛ├Ч100%. Given VSLLтАЛ=50% and VLLтАЛ=1 ml, we solve for VdтАЛ using the relationship between shrinkage and specific volume.
VstateтАЛ=VdтАЛ(1+100VSstateтАЛтАЛ) тАФ where VstateтАЛ is the volume at a specific state, VdтАЛ is dry volume, and VS is volumetric shrinkage in percent.
V2тАЛV1тАЛтАЛ=100+VS2тАЛ100+VS1тАЛтАЛ тАФ proportionality derived from volume-shrinkage relationships.
As a soil specimen dries, its volume decreases until it reaches the shrinkage limit, beyond which no further volume change occurs. The volumetric shrinkage is expressed relative to the dry volume. By setting up the ratio of volumetric changes at different moisture states, we relate the volume at liquid limit (VLLтАЛ) and dry volume (VdтАЛ) through the shrinkage factor.
Volumetric shrinkage represents the reduction in volume expressed as a percentage of the dry volume.
The shrinkage limit is the water content where the soil ceases to shrink upon further drying.
The dry volume is constant once the soil passes the shrinkage limit.
Calculation: Given VLLтАЛ=1 ml and VSLLтАЛ=50%, then 1=VdтАЛ(1+0.5), which leads to VdтАЛ=1.51тАЛ=0.667 ml.
Provides fundamental insight into soil plasticity.
Essential for assessing clay mineralogy and swelling potential.
Experimental determination of volumetric shrinkage is sensitive to specimen preparation.
Assumes isotropic shrinkage which may not hold for all soil structures.
Foundation design on expansive soils.
Earth dam construction and clay liner stability analysis.
The plastic limit information provided is redundant for the calculation of dry volume when the volume at liquid limit is explicitly given.
If VPLтАЛ was used, one would calculate using VPLтАЛ=VdтАЛ(1+0.3)=0.667├Ч1.3=0.867 ml.
C is correct тАФ The dry volume is calculated as 1+0.51тАЛ=0.667 ml.
Always verify if redundant data is provided in soil mechanics problems; focusing on the definition of volumetric shrinkage in terms of dry volume VdтАЛ is sufficient here.