Join 60,000+ competitive exam aspirants
The work ratio of closed cycle gas turbine power plant depends upon
Only on pressure ratio
Temperature ratio of the cycle and specific heat ratio
Pressure ratio, temperature ratio and specific heat ratio
Pressure ratio and specific heat ratio
Pressure ratio, temperature ratio and specific heat ratio
The work ratio (rwтАЛ) of a closed-cycle gas turbine power plant is defined as the ratio of net work output to the work developed by the turbine. It is a critical performance parameter that is mathematically expressed as a function of the cycle pressure ratio (rpтАЛ), the temperature ratio (t=TmaxтАЛ/TminтАЛ), and the adiabatic index or specific heat ratio (╬│).
The work ratio (rwтАЛ) of a closed-cycle gas turbine power plant is defined as the ratio of net work output to the work developed by the turbine. It is a critical performance parameter that is mathematically expressed as a function of the cycle pressure ratio (rpтАЛ), the temperature ratio (t=TmaxтАЛ/TminтАЛ), and the adiabatic index or specific heat ratio (╬│).
WnetтАЛ=WtтАЛтИТWcтАЛ
rwтАЛ=WtтАЛWtтАЛтИТWcтАЛтАЛ=1тИТWtтАЛWcтАЛтАЛ
T2тАЛ=T1тАЛ(rpтАЛ)╬│╬│тИТ1тАЛ
In a Brayton cycle, net work is the difference between turbine work and compressor work. Since both involve isentropic processes dependent on pressure ratio and involve air properties defined by ╬│, and because the temperatures at the start of compression and expansion are linked by the cycle temperature ratio, the work ratio becomes a combined function of these three parameters. A higher pressure ratio generally decreases the work ratio due to the disproportionate increase in compressor work requirements.
Work ratio is a measure of the sensitivity of the power plant to parasitic losses.
Higher work ratio implies better utilization of the turbine output.
It decreases as the compressor pressure ratio increases beyond the optimal point.
Specific heat ratio ╬│ represents the thermodynamic properties of the working fluid.
High thermal efficiency
Compact size due to use of dense working fluids
Reduced atmospheric pollution
Requires high-temperature heat exchangers
High initial capital cost
Complexity in controlling the closed-loop pressure
Nuclear power plants
Space power systems
Combined cycle power generation
The work ratio is specifically defined as the ratio of Net Work to Turbine Work, unlike the Back Work Ratio which is WcтАЛ/WtтАЛ.
Options A, B, and D are incomplete because they omit one or more of the three essential variables (rpтАЛ,t,╬│) required to define the thermodynamic state of the closed-loop cycle.
C is correct тАФ The work ratio in a closed cycle gas turbine is a comprehensive function of the operating pressure ratio, the temperature limits of the cycle, and the fluid properties represented by the specific heat ratio.
Always remember that in any cycle analysis, if the working fluid is air, ╬│ is constant (1.4), but the work ratio remains physically dependent on it; thus, always look for the option including all three parameters in competitive exams.