Join 60,000+ competitive exam aspirants
Thermal efficiency of a gas turbine improves because of
Reheating of gas after partial expansion
Removing the heat from compressed air between the stages of compression
Utilizing the heat of exhaust gases to heat the compressed air before it is sent to combustion chamber
All of above
All of above
The thermal efficiency of a gas turbine (Brayton Cycle) is improved by modifying the cycle to approach the Carnot efficiency. Reheating, intercooling, and regeneration are the three primary methods used to optimize performance by controlling the heat addition, heat rejection, and heat recovery processes.
The thermal efficiency of a gas turbine (Brayton Cycle) is improved by modifying the cycle to approach the Carnot efficiency. Reheating, intercooling, and regeneration are the three primary methods used to optimize performance by controlling the heat addition, heat rejection, and heat recovery processes.
╬╖thermalтАЛ=1тИТrp(╬│тИТ1)/╬│тАЛ1тАЛ тАФ Ideal Brayton Cycle Efficiency
╬╖regenтАЛ=h5тАЛтИТh2тАЛh3тАЛтИТh2тАЛтАЛ тАФ Effectiveness of Regenerator
Intercooling reduces the work of compression by cooling the air between stages. Reheating increases the turbine work output by providing more enthalpy to expand. Regeneration utilizes waste exhaust heat to pre-heat the compressed air before it enters the combustor, reducing the external fuel input required.
Intercooling reduces the compressor work input by keeping the compression process closer to isothermal.
Reheating increases the net work output of the cycle.
Regeneration significantly improves efficiency by recovering waste heat from the turbine exhaust.
These techniques collectively optimize the Gas Turbine cycle performance.
Improved cycle thermal efficiency
Increased specific power output
Reduced specific fuel consumption
Increased system complexity
Higher initial capital cost due to heat exchangers
Higher pressure drop losses
Combined Cycle Power Plants (CCPP)
Jet engines and aircraft propulsion
Industrial power generation
Reheating is only beneficial when used with regeneration.
Intercooling is more effective when the pressure ratio is high.
Option B refers to the process of Intercooling.
D is correct тАФ Reheating, intercooling, and regeneration are the fundamental cycle modifications that enhance gas turbine efficiency by optimizing energy flows.
In competitive exams, remember that while regeneration improves efficiency, it does not necessarily increase the specific power output of the turbine.