Join 60,000+ competitive exam aspirants
To obtain the liquid limit of a soil, a graph is plotted between :
volume of soil and water content
dry density and water content
water content and number of blows
void ratio of soil and number of blows
water content and number of blows
The liquid limit is determined using the Casagrande apparatus by plotting the water content against the corresponding number of blows required to close a standard groove. The liquid limit is defined as the water content at which the soil sample requires exactly 25 blows to close the groove for a length of 12.7 mm.
IS 2720 (Part 5): 1985
The liquid limit is determined using the Casagrande apparatus by plotting the water content against the corresponding number of blows required to close a standard groove. The liquid limit is defined as the water content at which the soil sample requires exactly 25 blows to close the groove for a length of 12.7 mm.
LL=wnтАЛ(25NтАЛ)tan╬▓ тАФ where LL is the liquid limit, wnтАЛ is the water content at N blows, and ╬▓ is the angle of the flow curve.
The Casagrande method relies on the relationship between the shear strength of the soil and its water content. As water content increases, the undrained shear strength of the soil decreases. The number of blows in the cup acts as a measure of the energy required to overcome the soil's shear resistance to flow; at 25 blows, the shear strength is approximately 2.0┬аkPa.
The flow curve is plotted on a semi-logarithmic scale with water content on the arithmetic axis and number of blows on the logarithmic axis.
The test is performed at a minimum of three moisture conditions to establish a reliable flow line.
The liquid limit corresponds to the point where the flow line intersects the abscissa of 25 blows.
Widely accepted as the standard reference for classifying fine-grained soils.
Provides a repeatable empirical measure of soil consistency.
The results can be subjective due to human error in groove cutting and blow counting.
Dependent on the mechanical condition and calibration of the Casagrande cup apparatus.
Soil classification according to the Unified Soil Classification System (USCS).
Estimating engineering properties like compressibility and permeability of clayey soils.
Option A relates to the shrinkage limit test (Volume Change vs Water Content).
Option B relates to the compaction test (Dry Density vs Water Content).
Option D is not a standard engineering correlation for consistency limits.
C is correct тАФ The liquid limit is uniquely determined from the flow curve by interpolating the water content at which the soil closes the groove in exactly 25 blows.
Remember that the flow curve is plotted on a semi-log scale; a higher slope indicates a soil with lower plasticity, while a flatter slope indicates higher plasticity.