Join 60,000+ competitive exam aspirants
What happens when the stop button is pushed?
its discontinue current through the main operating coil, hence motor get stopped.
its release Start button, hence motor get stopped.
overload coil operates, which open main operating coil contact, hence motor gets stopped.
disconnect the main supply directly
its discontinue current through the main operating coil, hence motor get stopped.
When the stop button (normally closed contact) is pushed in a motor starter circuit, it breaks the holding circuit supplying current to the main operating coil (contactor coil). De-energizing the operating coil collapses its magnetic field, releasing the electromagnetic armature and causing the main power contacts to open, which stops the motor.
When the stop button (normally closed contact) is pushed in a motor starter circuit, it breaks the holding circuit supplying current to the main operating coil (contactor coil). De-energizing the operating coil collapses its magnetic field, releasing the electromagnetic armature and causing the main power contacts to open, which stops the motor.
VcoilтАЛ=IcoilтАЛ├ЧRcoilтАЛ тАФ Ohm's law across operating coil (IcoilтАЛ=0 when circuit is opened)
FmтАЛтИЭIcoil2тАЛ тАФ Electromagnetic holding force produced by the main operating coil
In a direct-on-line (DOL) or automatic starter, the operating coil is wired in series with the normally closed (NC) Stop push-button and the overload relay contacts. Pressing the Stop button creates an open circuit in this control path. Consequently, current stops flowing through the main operating coil (IcoilтАЛ=0), causing the electromagnet to release the main contacts under spring tension.
The Stop push-button contains Normally Closed (NC) contacts connected in series with the operating coil.
The Start push-button uses Normally Open (NO) contacts wired in parallel with an auxiliary sealing (holding) contact.
Pressing the Stop button breaks the holding circuit permanently until the Start button is pressed again.
Undervoltage protection is inherently provided through this electromagnetic coil control scheme.
Provides fail-safe operation: if the control wire breaks, the motor automatically stops.
Prevents automatic restarting of the motor after a power supply failure (undervoltage protection).
Requires continuous energization of the operating coil while the motor is running, consuming minimal control power.
Mechanical wear on spring mechanism and contacts over extensive operational cycles.
Direct-On-Line (DOL) starters for 3-phase induction motors
Star-Delta and Auto-transformer motor control circuits
Option B is incorrect because releasing the Start button happens immediately after starting; the auxiliary contact holds the coil energized until the Stop button breaks the path.
Option C describes overload fault condition behavior, not normal manual stop operation.
Option D is incorrect because the push button breaks the low-current control circuit of the operating coil, not the heavy main power lines directly.
A is correct тАФ Pushing the stop button breaks the control circuit, interrupting current to the main operating coil and de-energizing it to stop the motor.
Always distinguish between control circuit devices (Stop/Start buttons, auxiliary contacts) and power circuit devices (main contacts, thermal overload heaters) in motor starter questions.