Join 60,000+ competitive exam aspirants
What is the application of geotechnical engineering in highway pavement design ?
Determination of traffic load
Designing of the footing for rigid pavements
Analysis of stability of the camber slope
Designing the thickness of flexible pavements
Designing the thickness of flexible pavements
Geotechnical engineering is fundamental in highway pavement design for determining the subgrade soil's bearing capacity. In flexible pavements, the pavement thickness is inversely proportional to the subgrade strength; hence, evaluating the soil strength is critical to prevent structural failure.
IRC: 37-2018
Geotechnical engineering is fundamental in highway pavement design for determining the subgrade soil's bearing capacity. In flexible pavements, the pavement thickness is inversely proportional to the subgrade strength; hence, evaluating the soil strength is critical to prevent structural failure.
CBR=Standard┬аload┬аat┬аsame┬аpenetrationLoad┬аat┬а2.5┬аmm┬аor┬а5┬аmm┬аpenetrationтАЛ├Ч100%
Total┬аThickness(H)=f(CBR,Cumulative┬аTraffic┬а(msa))
The design process uses soil properties, primarily the California Bearing Ratio (CBR), to determine the required thickness of various pavement layers. As the load is distributed downwards through the layers, the subgrade must be capable of supporting the accumulated stress without excessive deformation. Poor subgrade soil leads to higher required thicknesses of the sub-base and base courses to reduce the pressure transmitted to the soil to an allowable limit.
Subgrade strength is measured using field or laboratory CBR tests.
Flexible pavement design relies on the load-spreading ability of each layer.
Higher CBR values indicate better soil strength and require lower pavement thickness.
Soil drainage and moisture control are vital geotechnical considerations in highway design.
Optimized material usage and cost-effective design
Prevention of structural rutting and subgrade failure
Field testing for soil parameters is time-consuming
Soil properties are highly variable across different terrains
Thickness design for flexible highway pavements
Stabilization of subgrade using chemical additives
Traffic load (Option A) is determined by traffic surveys and axle load studies, not geotechnical engineering.
Footings for rigid pavements (Option B) relate to structural/foundation engineering rather than standard flexible pavement thickness design.
Camber slope (Option C) is a geometric design parameter for drainage, not a geotechnical calculation.
D is correct тАФ Geotechnical engineering provides the subgrade strength parameters (CBR) required to calculate the total thickness of a flexible pavement structure.
Remember that in IRC: 37, the design of flexible pavement is purely based on the subgrade CBR and design traffic in terms of million standard axles (msa).