Join 60,000+ competitive exam aspirants
During construction of roads, a feature that facilitates drainage of the pavement laterally is called ________.
kerbs
camber
shoulder
median
camber
Camber, also known as cross-slope, is the transverse inclination provided to the road surface to drain off rainwater from the pavement. It is essential for protecting the pavement structure from water ingress, which can weaken the subgrade.
IRC:73-1980
Camber, also known as cross-slope, is the transverse inclination provided to the road surface to drain off rainwater from the pavement. It is essential for protecting the pavement structure from water ingress, which can weaken the subgrade.
Camber=n1тАЛ or n% тАФ where n is the ratio of horizontal distance to vertical rise.
The principle relies on gravity and surface geometry. By sloping the pavement transversely towards the edges, water is directed away from the center of the road towards the shoulders or drainage channels. This prevents ponding, reduces hydroplaning risks, and increases pavement service life by minimizing moisture-related structural degradation.
Camber is expressed as 1 in n or as a percentage.
The value of camber depends on the type of road surface (e.g., concrete vs. gravel) and the intensity of rainfall.
Too high a camber causes discomfort and skidding, while too low a camber leads to water stagnation.
Commonly used shapes for camber include straight line, parabolic, or a combination of both.
Prevents water stagnation on the pavement surface.
Protects the subgrade from moisture-related weakening.
Improves road safety by reducing hydroplaning.
Helps in the quick drying of the road surface.
High camber may cause vehicles to drift towards the road edges.
Non-uniform wear of vehicle tires can occur if camber is excessive.
Construction complexity increases for parabolic cambers compared to straight-line cambers.
All types of highway construction.
Design of airport runways.
Urban street design.
IRC recommends values for camber ranging from 1.7% to 3.0% based on pavement type and rainfall.
Kerbs act as boundaries for the pavement; shoulders are for emergency stops; medians separate opposing traffic flows.
B is correct тАФ camber is the transverse slope provided to a road surface to facilitate lateral drainage.
Always remember that for high-speed roads, flatter cambers are preferred to ensure vehicle stability, while high-rainfall areas require steeper cambers to ensure rapid drainage.