Join 60,000+ competitive exam aspirants
What is the thickness of the laminated CRGO steel sheet used in the core of the transformer?
Ranging from 0.018 mm to 0.035 mm.
Ranging from 0.18 mm to 0.35 mm.
Ranging from 1.8 mm to 3.5 mm.
Ranging from 2.3 mm to 3.0 mm.
Ranging from 0.18 mm to 0.35 mm.
Cold Rolled Grain Oriented (CRGO) steel sheets used in transformer cores are manufactured in thin laminations to minimize eddy current losses. The standard thickness ranges between 0.18 mm and 0.35 mm to achieve optimal magnetic permeability and reduced core loss.
Cold Rolled Grain Oriented (CRGO) steel sheets used in transformer cores are manufactured in thin laminations to minimize eddy current losses. The standard thickness ranges between 0.18 mm and 0.35 mm to achieve optimal magnetic permeability and reduced core loss.
PeтАЛ=KeтАЛf2Bm2тАЛt2 тАФ Eddy current loss equation showing dependence on thickness t
ReddyтАЛтИЭt1тАЛ тАФ Resistance increase due to thin laminations
Eddy currents are circulating currents induced within a conductor by a changing magnetic field, following Faraday's law of induction. By laminating the core and insulating these layers, the path length for these currents is restricted, significantly increasing the electrical resistance and reducing the power dissipated as heat (PeтАЛ=KeтАЛf2Bm2тАЛt2).
CRGO steel has high magnetic permeability in the rolling direction.
Laminations are coated with a thin layer of varnish or insulation to prevent inter-lamination currents.
Thinner laminations reduce eddy current losses but increase manufacturing complexity.
Transformer efficiency is directly improved by minimizing these losses.
Significantly reduced eddy current losses
Improved transformer efficiency
Reduced operating temperature
Increased manufacturing cost due to precise rolling
Requires insulation between sheets
Fragile during assembly
Power Transformers
Distribution Transformers
High-frequency magnetic components
The use of silicon content (around 3-4%) in steel helps increase electrical resistivity, further reducing losses.
Option A (0.018-0.035 mm) is too thin for structural integrity, while options C and D represent thicknesses used in heavy structural steel, which would cause excessive heating in a transformer core.
B is correct тАФ The standard thickness for CRGO steel laminations in power transformers is maintained between 0.18 mm and 0.35 mm to effectively suppress eddy current losses.
Always remember that eddy current losses depend on the square of the lamination thickness (t2); hence, even small reductions in thickness yield significant energy savings.