Join 60,000+ competitive exam aspirants
When pipes of different diameters are connected in series from end to end to form a pipe line, the total head loss developed is equal to____
sum of major head losses in each pipe
Zero
Sum of local head losses only
Sum of local head losses and major head losses in each pipe
Sum of local head losses and major head losses in each pipe
When pipes of different diameters are connected in series, the total head loss in the system is the cumulative result of all energy dissipation mechanisms occurring along the entire pipeline. This includes both major losses (due to friction along the length of each pipe) and local/minor losses (due to pipe fittings, bends, valves, and sudden changes in diameter).
When pipes of different diameters are connected in series, the total head loss in the system is the cumulative result of all energy dissipation mechanisms occurring along the entire pipeline. This includes both major losses (due to friction along the length of each pipe) and local/minor losses (due to pipe fittings, bends, valves, and sudden changes in diameter).
hL,totalтАЛ=тИС(2gDfLv2тАЛ)+тИС(2gKv2тАЛ) тАФ Total head loss representing the sum of friction (major) and local (minor) losses
hlocalтАЛ=K2gv2тАЛ тАФ Head loss due to minor fittings or sudden changes in geometry
The total energy head supplied at the inlet must overcome resistance throughout the path. Friction factors change with pipe diameter and velocity as per the Darcy-Weisbach equation. Additionally, each transition point (e.g., a contraction or expansion) induces turbulence and vortex formation, causing local losses according to the head loss coefficient K multiplied by the velocity head 2gv2тАЛ.
Major head loss is primarily due to viscous resistance along the pipe wall length.
Local head losses occur due to turbulence at valves, bends, and sudden transitions in diameter.
For series pipes, the discharge Q remains constant throughout, while velocity v varies inversely with the square of the pipe diameter D.
Total energy equation is based on the principle of conservation of energy (Bernoulli's equation with losses).
Allows for precise engineering of pressure distribution in complex piping networks.
Enables identification of high-loss zones for system optimization.
Complex calculation for systems with many fittings or non-uniform diameter sections.
Sensitivity to changes in roughness and flow regime (Laminar/Turbulent).
Water distribution systems in urban infrastructure.
Design of industrial chemical processing pipelines.
Hydraulic power transmission systems.
Major loss is calculated using the Darcy-Weisbach equation: hfтАЛ=2gDfLv2тАЛ.
Option A is incomplete because it ignores the significant losses occurring at joints and fittings.
Option B is incorrect because real fluids always exhibit viscosity leading to energy dissipation.
Option C is incorrect because it neglects the significant major losses that occur along the length of the pipes.
D is correct тАФ Total head loss in a series pipe system is the summation of all major (frictional) and minor (local) losses occurring across every section and fitting in the pipeline.
Always check if the pipe is 'long' when solving numericals; if the length is very large compared to diameter, minor losses are often neglected, but for general theoretical questions, they must always be included.