Join 60,000+ competitive exam aspirants
Which of the following statements is INCORRECT about the friction factor of Darcy's equation?
The value of friction factor depends on the roughness condition of the pipe surface.
The value of friction factor depends on the Reynolds number of the flow.
Friction factor value is same for all the flow conditions.
Friction factor is a dimensionless quantity.
Friction factor value is same for all the flow conditions.
The friction factor (f) in the Darcy-Weisbach equation is not a constant for all flow conditions but is a function of the Reynolds number (Re) and the relative roughness of the pipe (epsilon/D). Statement C is incorrect because f varies significantly between laminar and turbulent flow regimes.
The friction factor (f) in the Darcy-Weisbach equation is not a constant for all flow conditions but is a function of the Reynolds number (Re) and the relative roughness of the pipe (epsilon/D). Statement C is incorrect because f varies significantly between laminar and turbulent flow regimes.
hfтАЛ=fтЛЕDLтАЛтЛЕ2gv2тАЛ тАФ Darcy-Weisbach head loss equation
f=Re64тАЛ тАФ Laminar flow friction factor
fтАЛ1тАЛ=тИТ2.0log10тАЛ(3.7╧╡/DтАЛ+RefтАЛ2.51тАЛ) тАФ Colebrook-White equation for turbulent flow
In laminar flow, the friction factor is solely a function of the Reynolds number, expressed as f=64/Re. In turbulent flow, the friction factor depends on both the Reynolds number and the relative pipe roughness, described by the Colebrook-White equation or visualised via the Moody chart.
Friction factor is dimensionless and is known as the Darcy friction factor.
For laminar flow (Re<2000), f is independent of surface roughness.
For turbulent flow (Re>4000), f depends on both Reynolds number and relative roughness.
In the fully rough turbulent regime, f depends only on the relative roughness (epsilon/D).
Provides a unified approach to calculate head loss across different regimes.
Accounts for both viscous effects and surface geometry.
Requires iterative solving for turbulent flow using the Colebrook equation.
Complex dependency on flow regimes.
Design of water distribution networks.
Analysis of industrial piping systems and fluid transport.
The friction factor mentioned is the Darcy friction factor (f), which is 4 times the Fanning friction factor (fFanningтАЛ=f/4).
Option C is incorrect because f is highly dependent on flow regimes (laminar vs turbulent) and surface conditions.
C is correct тАФ Friction factor value is not same for all flow conditions; it varies with Reynolds number and surface roughness.
When solving pipe flow problems, always check the Reynolds number first to determine if the flow is laminar or turbulent before choosing the friction factor calculation method.