Join 60,000+ competitive exam aspirants
Why are air vessels fitted in reciprocating pumps?
To reduce the head loss due to friction in suction and delivery pipe
For increasing the speed of rotation of the crank
For increasing the velocity of discharge
For faster discharge
To reduce the head loss due to friction in suction and delivery pipe
Air vessels are closed cast-iron chambers containing compressed air in the upper portion and liquid in the lower portion, fitted to the suction and delivery pipes of a reciprocating pump. They act as surge suppressors to maintain a uniform flow rate and minimize the frictional resistance in the piping system by eliminating flow acceleration fluctuations.
Air vessels are closed cast-iron chambers containing compressed air in the upper portion and liquid in the lower portion, fitted to the suction and delivery pipes of a reciprocating pump. They act as surge suppressors to maintain a uniform flow rate and minimize the frictional resistance in the piping system by eliminating flow acceleration fluctuations.
hfтАЛ=2gD4fLv2тАЛ тАФ Darcy-Weisbach equation representing head loss due to friction, where v is the velocity of flow.
╬ФhredтАЛтЙИConstant┬аflow┬аensures┬аlower┬аaverage┬аv2┬аvalues┬аin┬аthe┬аpipe.
In a reciprocating pump, the velocity of the fluid varies periodically with the movement of the piston, leading to high fluctuations in acceleration and consequently high frictional head losses. The air vessel absorbs the excess flow when the piston velocity is higher than average and releases it when the velocity is lower than average. This maintains a nearly constant velocity in the pipes, significantly reducing the average frictional head loss.
Air vessels are used to achieve a continuous and uniform supply of liquid.
They reduce the power required to drive the pump by lowering frictional head loss.
They prevent cavitation and separation in the suction pipe by maintaining pressure.
The reduction in frictional head loss is proportional to the square of the flow velocity fluctuation.
Uniform flow rate
Significant saving in power consumption
Reduction in acceleration head
Prevention of flow separation
Requires periodic maintenance of air charge
Additional space and installation cost
Potential for air leakage if seals are not maintained
High-speed reciprocating pumps
Long suction or delivery pipelines
Pumps requiring smooth, non-pulsating discharge
The acceleration head is given by haтАЛ=gLтАЛтЛЕaAтАЛтЛЕ╧Й2rcos╬╕. Air vessels effectively dampen these acceleration heads.
Option B is incorrect as air vessels do not affect the mechanical speed of the crankshaft.
Option C is incorrect as they reduce flow velocity fluctuations rather than increasing the mean velocity of discharge.
Option D is incorrect as the primary purpose is flow smoothing, not achieving a faster (instantaneous higher) discharge rate.
A is correct тАФ Air vessels are primarily installed to achieve uniform flow and reduce the head loss due to friction in the suction and delivery pipes.
Always remember that air vessels convert pulsating flow into steady flow, which directly reduces the magnitude of v2 terms in friction calculations, leading to substantial energy savings.