Join 60,000+ competitive exam aspirants
An oil of mass density 800 kg/m 3 is contained in a vessel. Calculate the height of water required to develop an equivalent hydrostatic pressure as that developed by oil of height 30 m. Take acceleration due to gravity as 9.81 m/sec 2
42 m
32 m
24 m
23 m
24 m
Hydrostatic pressure at a depth h in a fluid is given by P=╧Бgh. For equivalent pressure, the product of density and height for both fluids must be equal since g is constant.
Hydrostatic pressure at a depth h in a fluid is given by P=╧Бgh. For equivalent pressure, the product of density and height for both fluids must be equal since g is constant.
P=╧Бgh тАФ Hydrostatic pressure equation
╧БoilтАЛhoilтАЛ=╧БwaterтАЛhwaterтАЛ тАФ Equivalence condition
The principle relies on the hydrostatic law of pressure variation in a static fluid column. Since pressure P at depth h is independent of the shape of the container and depends solely on the density ╧Б, gravity g, and height h, equating the pressure of two fluids at the same site allows for a direct comparison of their pressure heads.
The acceleration due to gravity g cancels out when comparing pressures at the same location.
Density of oil is given as 800┬аkg/m3 and standard density of water is 1000┬аkg/m3.
Pressure is directly proportional to the product of density and depth.
Simplifies calculation by eliminating common constants.
Provides a clear relationship between specific gravity and pressure heads.
Assumes the fluid is incompressible.
Does not account for variations in gravitational acceleration across different altitudes.
Hydraulic pressure calculations in civil engineering structures.
Calibration of manometers and pressure gauges.
Given: ╧БoilтАЛ=800┬аkg/m3, hoilтАЛ=30┬аm, ╧БwaterтАЛ=1000┬аkg/m3. Calculation: hwaterтАЛ=1000800├Ч30тАЛ=24┬аm.
Option A (42 m), Option B (32 m), and Option D (23 m) are incorrect based on the calculated value of 24┬аm.
C is correct тАФ The required height of water is calculated as 24┬аm by equating the hydrostatic pressure of oil and water.
When comparing pressure heads of two different liquids, always remember the ratio of heights is inversely proportional to the ratio of their densities: h2тАЛh1тАЛтАЛ=╧Б1тАЛ╧Б2тАЛтАЛ.