Join 60,000+ competitive exam aspirants
Based on Allen-Hazens experiments, the co-efficient of permeabilty k (cm/s) is related to the effective size of soil D 10 (cm) as _________. (where C is a constant with a value between 100 and 150).





Allen Hazen's formula is an empirical relationship used to estimate the coefficient of permeability (k) of uniform sandy soils based on their particle size distribution. It states that permeability is proportional to the square of the effective grain size (D10тАЛ), where D10тАЛ is the size in centimeters for which 10% of the soil particles are finer.
Allen Hazen's formula is an empirical relationship used to estimate the coefficient of permeability (k) of uniform sandy soils based on their particle size distribution. It states that permeability is proportional to the square of the effective grain size (D10тАЛ), where D10тАЛ is the size in centimeters for which 10% of the soil particles are finer.
k=CтЛЕD102тАЛ тАФ Allen Hazen's formula for permeability where k is in cm/s and D10тАЛ is in cm.
The principle relies on the hydraulic flow through the voids of a granular soil matrix. Since the void space dimensions are geometrically related to the grain size, the resistance to water flow (and thus permeability) scales with the square of the pore opening size, which is directly linked to the D10тАЛ diameter of the grains.
The constant C typically ranges between 100 and 150.
This relationship is specifically applicable to clean, uniform sand deposits.
The unit of D10тАЛ must be in centimeters (cm) for the formula to result in k in cm/s.
D10тАЛ is known as the 'effective size' of the soil particles.
Provides a simple, quick estimation of permeability without performing complex laboratory tests.
Useful for initial site characterization of sandy soils.
Not applicable for well-graded soils or fine-grained soils like silts and clays.
Accuracy is limited due to its empirical nature and reliance on a single particle size index.
Estimation of hydraulic conductivity of sand filters.
Preliminary permeability assessments in geotechnical engineering projects.
The constant C is sometimes referred to as the Hazen's constant and accounts for the shape and packing of soil particles.
Option A (k=C/D102тАЛ) and Option B (k=D10тАЛ/C2) are incorrect as they incorrectly define the proportionality relationship.
Option D (k=C2D10тАЛ) is dimensionally inconsistent with the established empirical formula.
C is correct тАФ The empirical Allen-Hazen formula is given by k=CтЛЕD102тАЛ.
Always check the units of D10тАЛ when applying empirical permeability formulas, as the value of C is highly dependent on whether the input is in mm or cm.