Join 60,000+ competitive exam aspirants
The soil has a liquid limit of 50 %. Following the A-line, in the plasticity chart as per IS : 1498 тАУ 1970, the corresponding plastic limit is :
28.1%
25%
Insufficient data
21.9%
28.1%
The A-line in the plasticity chart defines the empirical boundary between inorganic clays and inorganic silts/organic soils. For a given liquid limit (wLтАЛ), the plasticity index (IPтАЛ) of the A-line is calculated using the formula IPтАЛ=0.73(wLтАЛтИТ20).
IS 1498:1970
The A-line in the plasticity chart defines the empirical boundary between inorganic clays and inorganic silts/organic soils. For a given liquid limit (wLтАЛ), the plasticity index (IPтАЛ) of the A-line is calculated using the formula IPтАЛ=0.73(wLтАЛтИТ20).
IPтАЛ=0.73(wLтАЛтИТ20) тАФ Formula for the A-line in the plasticity chart
IPтАЛ=wLтАЛтИТwPтАЛ тАФ Relation between plasticity index, liquid limit, and plastic limit
The plasticity chart classifies fine-grained soils based on their plasticity index and liquid limit. Soils plotting above the A-line are generally classified as clays, while those below are classified as silts or organic soils. Given wLтАЛ=50%, the IPтАЛ at the A-line represents the threshold value, allowing for the calculation of the plastic limit (wPтАЛ) using the relation IPтАЛ=wLтАЛтИТwPтАЛ.
The A-line is defined by the equation IPтАЛ=0.73(wLтАЛтИТ20).
For wLтАЛ=50%, IPтАЛ=0.73(50тИТ20)=0.73├Ч30=21.9%.
Given IPтАЛ=wLтАЛтИТwPтАЛ, then wPтАЛ=wLтАЛтИТIPтАЛ=50тИТ21.9=28.1%.
The plastic limit is the water content at the boundary between the plastic and semi-solid states.
Provides a standardized graphical method for soil classification.
Helps in predicting the engineering behavior of fine-grained soils.
Does not account for the activity of clay minerals.
Empirical nature may not fully represent field performance in complex site conditions.
Classification of fine-grained soils in geotechnical engineering.
Initial assessment of soil compressibility and permeability characteristics.
The constant 0.73 is an empirical slope coefficient derived from Casagrande's research.
Option D (21.9%) represents the Plasticity Index, not the Plastic Limit.
Calculation: IPтАЛ=0.73(50тИТ20)=21.9. Therefore, wPтАЛ=50тИТ21.9=28.1%.
A is correct тАФ The plastic limit calculated using the A-line relation IPтАЛ=0.73(wLтАЛтИТ20) and wPтАЛ=wLтАЛтИТIPтАЛ results in 28.1%.
Remember that the A-line equation IPтАЛ=0.73(wLтАЛтИТ20) applies only for wLтАЛ>20. If wLтАЛ<20, the line is often considered not applicable for this standard classification.