Join 60,000+ competitive exam aspirants
Compaction Test 1- Weight of hammer = 10 kg, Height of fall = 500 mm, Number of layers = 3, Number of blows per layer = 25. Compaction Test 2- Weight of hammer = 5 kg, Height of fall = 250 mm, Number of layers = 6, Number of blows per layer = 25. The ratio of compactive energy of compaction test 1 to that of compaction test 2 is:
0.5
8
4
2
2
Compactive energy imparted to soil is calculated as the product of the hammer weight, height of fall, number of blows per layer, and number of layers, divided by the volume of the mold. Since the mold volume is constant for standard tests, the ratio of energies depends on the total work done by the hammer.
IS 2720 (Part 7 & 8)
Compactive energy imparted to soil is calculated as the product of the hammer weight, height of fall, number of blows per layer, and number of layers, divided by the volume of the mold. Since the mold volume is constant for standard tests, the ratio of energies depends on the total work done by the hammer.
E=VN├Чn├ЧW├ЧhтАЛ тАФ Compactive effort formula per unit volume
E2тАЛE1тАЛтАЛ=N2тАЛ├Чn2тАЛ├ЧW2тАЛ├Чh2тАЛN1тАЛ├Чn1тАЛ├ЧW1тАЛ├Чh1тАЛтАЛ тАФ Energy ratio calculation
The energy applied to a soil mass during laboratory compaction is directly proportional to the total potential energy expended by the falling hammer. The formula for total energy E is given by E=VN├Чn├ЧW├ЧhтАЛ, where N is layers, n is blows, W is weight, h is height, and V is volume.
Compactive energy is measured in kJ/m3 or J/cm3.
Increasing the number of layers or blows per layer increases the dry density achieved.
The mold volume remains constant in both test cases provided.
Test 1 energy: 3├Ч25├Ч10├Ч0.5=375 units.
Test 2 energy: 6├Ч25├Ч5├Ч0.25=187.5 units.
Predicts optimum moisture content for field compaction
Standardizes soil density requirements for construction
Laboratory compaction does not perfectly simulate heavy field roller equipment
Dynamic compaction may break down particles in certain sensitive soils
Embankment construction for highways and railways
Earth dam core compaction
Subgrade preparation
| Feature | Test 1 | Test 2 |
|---|---|---|
Compaction Energy | 375 units | 187.5 units |
Calculated ratio: 187.5375тАЛ=2.
Option A is incorrect as it is the inverse ratio.
Option B and C are arithmetic errors.
D is correct тАФ The ratio of compactive energy for Test 1 to Test 2 is 187.5375тАЛ=2.
Remember that energy is directly proportional to weight and height of fall, but volume of the mold is the denominator; always check if the mold volume is identical.