Join 60,000+ competitive exam aspirants
What is the function of a non-return valve?
Allow the flow of liquid in one direction and prevents it from flowing back in opposite direction in a pipe flow system
Blocks the flow of fluid in all directions in a pipe flow system
Allows flow of liquid in a direction opposite to the pumping direction of liquid
Allow the flow of liquid in both upward and downward direction in a pipe flow system
Allow the flow of liquid in one direction and prevents it from flowing back in opposite direction in a pipe flow system
A non-return valve (NRV), also known as a check valve, is a mechanical device designed to permit fluid flow in only one direction. It automatically closes to prevent reverse flow when the upstream pressure drops or the downstream pressure exceeds the inlet pressure.
IS 5312: Part 1: 2004 (Swing Check Type Reflux Valves for Waterworks Purposes)
A non-return valve (NRV), also known as a check valve, is a mechanical device designed to permit fluid flow in only one direction. It automatically closes to prevent reverse flow when the upstream pressure drops or the downstream pressure exceeds the inlet pressure.
FpтАЛ>FgтАЛ+FsтАЛ тАФ Condition for opening, where FpтАЛ is the pressure force, FgтАЛ is gravitational force, and FsтАЛ is spring force
╬ФP=KтЛЕ21тАЛ╧Бv2 тАФ Head loss calculation where K is the valve resistance coefficient
The valve operates automatically based on the pressure differential across the valve disc or flap. When the fluid flows in the intended direction, the pressure force overcomes the resistance (gravity or spring force), lifting the valve disc. If the flow reverses, the pressure on the downstream side, combined with the weight of the valve element or an internal spring, forces the disc against the seat to create a positive seal.
Non-return valves are self-actuating and do not require external power or manual control.
They are critical in preventing backflow that could damage pumps or cause system contamination.
Common types include swing check, lift check, and ball check valves.
Water hammer can occur if the valve closes too rapidly, which is a key design consideration for large pipelines.
Prevents backflow automatically
Protects pumps and compressors from damage
Simple design and maintenance
Available in various materials for corrosive fluids
Potential for pressure drop across the valve
Internal moving parts can wear out over time
Risk of water hammer during sudden closure
Pump discharge lines to prevent reverse flow on pump shutdown
Hydraulic systems and pneumatic circuits
Boiler feed water lines
Process piping in refineries and chemical plants
Option B describes a closed isolation valve or a block valve, not a check valve.
Option C describes the exact opposite of the intended functionality (i.e., a failure condition).
Option D is incorrect as it implies bidirectional flow without restriction, which negates the primary 'non-return' function.
A is correct тАФ A non-return valve is specifically engineered to ensure unidirectional flow by preventing backflow using internal mechanical constraints.
In fluid mechanics exams, remember that NRVs are essential for pump protection; always assume a check valve is installed downstream of a centrifugal pump to avoid reverse rotation during power failure.