Join 60,000+ competitive exam aspirants
What is the primary factor that governs the shear strength of sands?
Pore pressure
Void ratio
Friction angle
Cohesion
Friction angle
The shear strength of non-cohesive soils like sand is primarily dictated by the internal angle of friction (╧Х). Since sand lacks inherent cohesive forces between particles, its strength arises entirely from inter-particle friction and mechanical interlocking.
IS 2720-13:1986
The shear strength of non-cohesive soils like sand is primarily dictated by the internal angle of friction (╧Х). Since sand lacks inherent cohesive forces between particles, its strength arises entirely from inter-particle friction and mechanical interlocking.
╧Д=╧ГтА▓tan(╧Х) тАФ Coulomb's Law for cohesionless soils where ╧Д is shear strength and ╧ГтА▓ is effective normal stress.
╧Х=2tanтИТ1(KpтАЛтАЛ1тАЛ) тАФ Relationship between angle of friction and Rankine's passive earth pressure coefficient.
When a shear force is applied to sand, particles must slide over each other or dilate to move past one another. The resistance generated is proportional to the normal stress acting on the failure plane, governed by the Coulomb failure criterion. The magnitude of this resistance is defined by the friction angle, which depends on mineralogy, grain shape, and packing density.
Sands are classified as cohesionless soils where c=0.
The friction angle ╧Х is highly sensitive to the relative density of the sand deposit.
Effective stress ╧ГтА▓ is crucial, as pore pressure (u) reduces the effective stress: ╧ГтА▓=╧ГтИТu.
Angular grains provide higher interlocking and friction angles compared to rounded grains.
Easier analytical modeling using Mohr-Coulomb failure criteria.
Predictable behavior under drained conditions.
High sensitivity to drainage conditions (pore pressure buildup).
Prone to liquefaction under seismic loading.
Design of shallow foundations on sandy strata.
Slope stability analysis for sandy embankments.
Standard values for ╧Х in sand typically range from 28┬░ to 45┬░.
Option B (Void ratio) affects the friction angle but is not the direct measure of strength itself.
Option D (Cohesion) is essentially zero for pure sands.
C is correct тАФ The shear strength of sand is directly dependent on the friction angle which governs the inter-particle resistance under normal stress.
Always remember that for purely cohesionless soils, the shear strength intercept c is zero; therefore, c should never be considered a governing factor in sand shear strength calculations.