Join 60,000+ competitive exam aspirants
A chemical plant discharges 150,000 m3/hr of wastewater containing 200 mg/L of sulfur compounds. What is the mass of sulfur compounds discharged per hour?
30,000 kg
40,000 kg
50,000 kg
60,000 kg
30,000 kg
To calculate the mass of a pollutant discharged, one must multiply the volumetric flow rate of the wastewater by the concentration of the substance. Given the flow is 150,000┬аm3/hr and concentration is 200┬аmg/L, consistency in units is required to find the mass in kilograms.
To calculate the mass of a pollutant discharged, one must multiply the volumetric flow rate of the wastewater by the concentration of the substance. Given the flow is 150,000┬аm3/hr and concentration is 200┬аmg/L, consistency in units is required to find the mass in kilograms.
Mass┬аRate=Q├ЧC
Conversion┬аFactor:┬а1┬аkg=106┬аmg
The principle relies on the conversion of volume to liters and concentration units. Since 1┬аm3=1,000┬аLiters, the total flow in Liters is 150,000├Ч1,000=150,000,000┬аL/hr. Multiplying this by 200┬аmg/L gives the total mass in milligrams per hour, which is then divided by 1,000,000 to convert milligrams to kilograms.
Always convert cubic meters to liters first: 1┬аm3=103┬аL.
Ensure concentration units (mg/L) are compatible with the volume flow rate (L/hr).
Final conversion from milligrams to kilograms requires division by 106.
Provides a direct estimation of pollutant loading.
Essential for calculating the design capacity of wastewater treatment units.
Assumes steady-state discharge.
Does not account for variable flow rates during peak hours.
Environmental impact assessment.
Wastewater treatment plant design.
Regulatory compliance monitoring.
Calculation: 150,000┬аm3/hr├Ч1,000┬аL/m3├Ч200┬аmg/L=30,000,000,000┬аmg/hr.
Converting to kg: 1,000,000┬аmg/kg30,000,000,000┬аmg/hrтАЛ=30,000┬аkg/hr.
Other options result from common decimal misplacement errors during unit conversion.
A is correct тАФ The total mass of sulfur compounds discharged is calculated as 30,000┬аkg/hr after applying the necessary unit conversions.
In environmental engineering problems, always check the units of volume (m3 vs L) before multiplying by concentration (mg/L) to avoid a factor of 1,000 or 1,000,000 error.