Join 60,000+ competitive exam aspirants
Alum as a coagulant is found to be most effective when the pH range of water is:
5 to 4.5
5 to 6
7 to 8
8 to 9
7 to 8
Alum, chemically known as aluminum sulphate Al2тАЛ(SO4тАЛ)3тАЛтЛЕ18H2тАЛO, acts as a coagulant by forming insoluble aluminum hydroxide precipitates. It is found to be most effective in the pH range of 6.5 to 8.5, which covers the commonly accepted value of 7 to 8.
CPHEEO Manual on Water Supply and Treatment
Alum, chemically known as aluminum sulphate Al2тАЛ(SO4тАЛ)3тАЛтЛЕ18H2тАЛO, acts as a coagulant by forming insoluble aluminum hydroxide precipitates. It is found to be most effective in the pH range of 6.5 to 8.5, which covers the commonly accepted value of 7 to 8.
Al2тАЛ(SO4тАЛ)3тАЛ+3Ca(HCO3тАЛ)2тАЛтЖТ2Al(OH)3тАЛ+3CaSO4тАЛ+6CO2тАЛ тАФ Chemical reaction for floc formation
When added to water containing alkalinity, Alum reacts to form aluminum hydroxide flocs, which possess a positive charge that neutralizes the negative charge of colloidal impurities. The reaction is represented by: Al2тАЛ(SO4тАЛ)3тАЛтЛЕ18H2тАЛO+3Ca(HCO3тАЛ)2тАЛтЖТ2Al(OH)3тАЛтЖУ+3CaSO4тАЛ+18H2тАЛO+6CO2тАЛ. If the pH is too low or too high, the solubility of aluminum species increases, preventing the formation of the necessary precipitate.
Alum is effective in the pH range 6.5тИТ8.5.
Alkalinity is required in water for the reaction to proceed.
If water lacks alkalinity, lime or soda ash is added to facilitate the reaction.
The process relies on charge neutralization of colloids.
Effective at removing turbidity and color
Readily available and economical
Reduces the alkalinity of water
Increases the hardness of water due to CaSO4тАЛ formation
Coagulation-flocculation in municipal water treatment
Industrial wastewater treatment
Below a pH of 5, the coagulation efficiency drops significantly due to incomplete precipitation.
Above a pH of 8.5, the aluminum ions may form soluble aluminate ions, Al(OH)4тИТтАЛ, which do not contribute to coagulation.
C is correct тАФ Alum operates optimally for flocculation within the slightly alkaline range of 7 to 8.
Remember that Alum removes alkalinity; if you see a question about 'Alum and pH', check if the alkalinity is being consumed or if external buffering agents are needed.