Join 60,000+ competitive exam aspirants
An exchangeable sodium percentage (ESP) less than 15, indicates that the soil is:
Saline
Sodic
Alkaline
Basic
Saline
Soils are classified based on their salinity and alkalinity levels. A soil with an Exchangeable Sodium Percentage (ESP) less than 15 is generally classified as saline soil, provided it has high soluble salts and an Electrical Conductivity (EC) greater than 4┬аdS/m.
US Salinity Laboratory Staff, Agriculture Handbook 60
Soils are classified based on their salinity and alkalinity levels. A soil with an Exchangeable Sodium Percentage (ESP) less than 15 is generally classified as saline soil, provided it has high soluble salts and an Electrical Conductivity (EC) greater than 4┬аdS/m.
ESP=CECExchangeable┬аNa+тАЛ├Ч100
SAR=2[Ca2+]+[Mg2+]тАЛтАЛ[Na+]тАЛ
The classification depends on the concentration of sodium ions relative to other cations (Ca2+,Mg2+) on the soil exchange complex. If ESP <15 and EC >4┬аdS/m, sodium does not dominate the exchange sites sufficiently to cause soil dispersion, but soluble salts are high enough to affect plant growth through osmotic stress.
Saline soil: EC >4┬аdS/m, ESP <15, pH <8.5
Sodic soil: EC <4┬аdS/m, ESP >15, pH >8.5
Saline-Sodic soil: EC >4┬аdS/m, ESP >15, pH usually <8.5
ESP represents the proportion of the soil cation exchange capacity occupied by sodium ions.
Predicts soil structural stability
Guides effective leaching and reclamation practices
Does not account for soil texture directly
Laboratory analysis required for accurate determination
Irrigation management
Agricultural soil reclamation
Environmental impact assessments for civil projects
Option B (Sodic) requires ESP >15.
Option C (Alkaline) and D (Basic) relate to pH levels (>7 and >8.5 respectively), which are correlated but distinct from the specific ESP metric used for salinity classification.
A is correct тАФ An ESP less than 15 with significant electrical conductivity indicates the soil is primarily saline.
Always remember the threshold 15 for ESP and 4 dS/m for EC; these values are the standard cutoff points for distinguishing between saline and sodic soils in geotechnical and agricultural engineering.