Join 60,000+ competitive exam aspirants
At a point on a streamline, the velocity of the fluid is 5┬аm/s, and the radius of curvature is 2┬аm. If the rate of change of velocity along the streamline is 2┬аm/s2, what is the total acceleration at this point?
6 ┬аm/s2
15.56 ┬аm/s2
12.65 ┬аm/s2
10 ┬аm/s2
12.65 ┬аm/s2
Total acceleration of a fluid particle in curvilinear motion is the vector sum of its convective (tangential) acceleration and its normal (centripetal) acceleration. Given the velocity V=5┬аm/s, radius of curvature R=2┬аm, and tangential acceleration atтАЛ=2┬аm/s2, we calculate the normal acceleration and combine them using the Pythagorean theorem.
Total acceleration of a fluid particle in curvilinear motion is the vector sum of its convective (tangential) acceleration and its normal (centripetal) acceleration. Given the velocity V=5┬аm/s, radius of curvature R=2┬аm, and tangential acceleration atтАЛ=2┬аm/s2, we calculate the normal acceleration and combine them using the Pythagorean theorem.
atтАЛ=dtdVтАЛ=2┬аm/s2 тАФ Tangential acceleration
anтАЛ=RV2тАЛ=252тАЛ=12.5┬аm/s2 тАФ Normal acceleration
a=at2тАЛ+an2тАЛтАЛ=22+12.52тАЛ=4+156.25тАЛ=160.25тАЛтЙИ12.658┬аm/s2 тАФ Total acceleration
The acceleration in fluid flow is decomposed into two components. The tangential component atтАЛ=dtdVтАЛ represents the rate of change of velocity magnitude along the streamline. The normal component anтАЛ=RV2тАЛ accounts for the change in direction of the velocity vector due to the curvature of the streamline. The resultant total acceleration a=at2тАЛ+an2тАЛтАЛ is directed at an angle to the streamline.
Total acceleration at a point is the geometric sum of tangential and normal components.
Tangential acceleration is zero in uniform flow.
Normal acceleration is zero in rectilinear (straight-line) flow.
Enables precise tracking of particle motion in complex flow fields.
Essential for calculating pressure gradients in curved conduits.
Requires knowledge of streamline geometry which may be difficult in turbulent flow.
Assumes steady-state conditions for simple analysis.
Design of hydraulic turbines and centrifugal pumps.
Analysis of fluid flow through pipe bends and elbows.
Option C is the closest correct answer based on standard calculation: 160.25тАЛтЙИ12.66┬аm/s2.
Option D is incorrect as it assumes simple addition, which is invalid for perpendicular vector components.
C is correct тАФ The total acceleration is calculated as the vector sum of tangential and normal accelerations, resulting in тЙИ12.65┬аm/s2.
Always verify if components are perpendicular before simply adding them; acceleration components in fluid kinematics are orthogonal.