Join 60,000+ competitive exam aspirants
In a standard Proctor test, MDD = 1.85┬аg/cc, OMC = 12%. In the field, dry density achieved = 1.73┬аg/cc. Degree of compaction (%) is:
91.3%
93.5%
95%
96.5%
93.5%
The degree of compaction represents the ratio of the dry density achieved in the field to the maximum dry density (MDD) obtained in the laboratory Proctor test. It is expressed as a percentage to evaluate the quality and effectiveness of site compaction.
IS 2720 (Part 7): Methods of Test for Soils - Determination of water content-dry density relation using light compaction
The degree of compaction represents the ratio of the dry density achieved in the field to the maximum dry density (MDD) obtained in the laboratory Proctor test. It is expressed as a percentage to evaluate the quality and effectiveness of site compaction.
Degree┬аof┬аCompaction┬а(%)=(╬│d(max,┬аlab)тАЛ╬│d(field)тАЛтАЛ)├Ч100
The field dry density is determined by methods such as the Sand Replacement test or Core Cutter method. By dividing the field density by the lab-derived MDD, engineers quantify the relative density achieved, which correlates with the soil's strength and compressibility properties.
The test ensures that the soil meets the design requirements for bearing capacity and settlement.
MDD and OMC are specific to the type of soil and the compactive effort used in the laboratory.
Field compaction is generally required to achieve 95% to 98% of the lab MDD for road bases.
Provides a simple numerical benchmark for quality control.
Ensures uniform soil density across construction sites.
Does not account for variations in soil composition on-site.
Requires frequent calibration of field testing equipment.
Embankment construction for highways and railways.
Backfilling of trenches and foundation pits.
Calculation: Degree┬аof┬аCompaction=(1.73/1.85)├Ч100=93.51%.
The result rounds to 93.5%.
B is correct тАФ The degree of compaction is calculated as the ratio of field dry density to MDD, which yields 93.5%.
Always ensure the field density and lab density units are identical (g/cc) before calculating the ratio.