Join 60,000+ competitive exam aspirants
What is the minimum required area of tension reinforcement (As,minтАЛ) for a reinforced concrete beam with a width (b) of 230 mm and an effective depth (d) of 450 mm, using Fe415 grade steel (where the yield strength, fyтАЛ, is 415 MPa)?
160 mm┬▓
212 mm┬▓
255 mm┬▓
300 mm┬▓
212 mm┬▓
The minimum reinforcement in a reinforced concrete beam is provided to prevent sudden failure upon the formation of the first crack. For a beam of width b and effective depth d, the minimum area of tension reinforcement is determined using the code-specified ratio based on the yield strength of steel.
IS 456:2000 Cl. 26.5.1.1
The minimum reinforcement in a reinforced concrete beam is provided to prevent sudden failure upon the formation of the first crack. For a beam of width b and effective depth d, the minimum area of tension reinforcement is determined using the code-specified ratio based on the yield strength of steel.
bdAs,minтАЛтАЛ=fyтАЛ0.85тАЛ тАФ Relationship between area of steel and beam dimensions
As,minтАЛ=fyтАЛ0.85тЛЕbтЛЕdтАЛ тАФ Formula for calculating minimum tension reinforcement
The minimum area of reinforcement is necessary to ensure that the flexural cracking load of the concrete is less than the load that causes the steel reinforcement to reach its yield strength. This ensures that the beam does not fail in a brittle, explosive manner immediately after cracking.
The constant 0.85 in the numerator represents the minimum percentage of tension reinforcement for Fe415 and Fe500 grade steel.
The calculation for the given problem is As,minтАЛ=4150.85├Ч230├Ч450тАЛ=212.16┬аmm2.
Minimum reinforcement is mandatory regardless of the design load to control shrinkage and temperature cracks.
Prevents sudden collapse (brittle failure)
Ensures ductile performance post-cracking
Increases material cost for lightly loaded members
Congestion of reinforcement in very narrow sections
Reinforced concrete beam design
Slab design (subject to minimum steel ratios)
The calculated value 212.16┬аmm2 is rounded to the nearest integer, which matches Option B.
The formula bdAsтАЛтАЛтЙеfyтАЛ0.85тАЛ is universally applied in Indian structural design practice for beams.
B is correct тАФ The minimum area of tension reinforcement is calculated as 212┬аmm2 using the standard IS 456 code provision.
Always verify the grade of steel (fyтАЛ) as the minimum steel requirement is inversely proportional to the yield strength of the reinforcement.