Join 60,000+ competitive exam aspirants
What is the primary purpose of the cross-section method in surveying?
To plot the contour lines
To measure horizontal distances only
To record the elevations at regular interval
To calculate the area of the land
To record the elevations at regular interval
The cross-section method in surveying involves taking transverse measurements perpendicular to the longitudinal centerline of a project (like a road or railway). Its primary objective is to determine the ground profile at regular intervals to compute earthwork quantities such as cut and fill volumes.
IS 13311:1992
The cross-section method in surveying involves taking transverse measurements perpendicular to the longitudinal centerline of a project (like a road or railway). Its primary objective is to determine the ground profile at regular intervals to compute earthwork quantities such as cut and fill volumes.
A=21тАЛ├Ч(d1тАЛ+d2тАЛ)├Чh тАФ Simplified area calculation for a cross-section segment
V=2A1тАЛ+A2тАЛтАЛ├ЧL тАФ Trapezoidal rule for calculating earthwork volume between two cross-sections
During the survey, the centerline is established first. At every station, levels are taken on either side of the center at specific distances. These lateral distances and corresponding elevations allow the surveyor to draw cross-sectional profiles which are essential for calculating the cross-sectional area of earthwork.
Used extensively in road, canal, and railway engineering.
Provides a transverse vertical section of the ground surface.
Required for determining the amount of soil to be excavated or filled.
Enables accurate volumetric calculation of cut and fill.
Helps in designing the template of the roadway or channel.
Labor-intensive as it requires many readings across the centerline.
Prone to errors if the centerline alignment is not precisely marked.
Highway and Railway alignment surveys.
Canal and irrigation project planning.
Contouring is done using methods like grid, radial, or cross-section, but 'plotting contours' is a broader objective of topographic surveying.
Option A is incorrect because contouring is the result, not the primary method purpose. Option B is limited because it records elevations, not just horizontal distance. Option D is an application/outcome rather than the survey method's fundamental recording process.
C is correct тАФ The cross-section method is specifically utilized to record elevations at regular intervals perpendicular to the survey line.
Always distinguish between the 'method' (recording data) and the 'objective' (calculating volume/area); in exams, the method refers to the data acquisition step.