Join 60,000+ competitive exam aspirants
Which test is used to determine the hardness of stones?
Attrition test
Crushing test
Smith’s test
Brinell hardness test
Attrition test
The hardness of building stones is determined using the Deval attrition test. This test evaluates the resistance of the stone to wear caused by abrasion and mechanical impact, simulating the stresses experienced by stones in road construction or heavy traffic.
IS: 2386 (Part IV)
The hardness of building stones is determined using the Deval attrition test. This test evaluates the resistance of the stone to wear caused by abrasion and mechanical impact, simulating the stresses experienced by stones in road construction or heavy traffic.
Coefficient┬аof┬аHardness=20тИТ(3Loss┬аin┬аweight┬аin┬аgramsтАЛ)
Percentage┬аof┬аWear=(W1тАЛW1тАЛтИТW2тАЛтАЛ)├Ч100%
The principle relies on the loss of weight of a specific quantity of stone aggregates when subjected to rotational friction inside a steel cylinder (Deval machine). The specimen is rotated for a specified number of revolutions (usually 10,000) at a set speed, causing pieces to rub against each other and the machine walls. The percentage of wear is then calculated based on the weight loss relative to the original sample weight.
Hardness is the ability of stone to resist abrasive forces.
The attrition test is primarily used for road-building aggregates.
A higher coefficient of hardness indicates better quality stone.
Stones with a coefficient of hardness less than 14 are considered soft and generally unsuitable for heavy-duty traffic surfaces.
Simulates real-world traffic wear conditions.
Quantitative and objective measurement of durability.
Requires a significant amount of material for testing.
Time-consuming as it requires thousands of machine revolutions.
Evaluation of aggregates for road construction.
Selection of natural stones for flooring subjected to foot traffic.
The hardness of a stone can also be evaluated using the Mohs scale for mineralogical hardness, but the attrition test is the standard civil engineering approach for aggregate quality.
Option B (Crushing test) determines the compressive strength. Option C (Smith's test) is used to check for the presence of earthy or soluble matter in stone. Option D (Brinell hardness test) is standard for metals, not masonry stones.
A is correct тАФ The attrition test is the designated engineering method to quantify the hardness and resistance to wear of natural stones used in construction.
Always differentiate between 'Strength' and 'Hardness'. Strength is measured by the Crushing test, while Hardness is measured by the Attrition test.