Join 60,000+ competitive exam aspirants
A soil has specific gravity (6s) = 2.65 and void ratio (e) = 0.6 Find its dry unit weight (kN/m┬│), Yw = 9.81kN / (m┬│)
15.3
16.25
17.23
18.1
16.25
The dry unit weight (╬│dтАЛ) of a soil sample is defined as the weight of solids per unit total volume of soil. Given the specific gravity (GsтАЛ) and the void ratio (e), the dry unit weight is calculated using the phase relationship formula considering the volume of voids.
IS 2720-3: 1980
The dry unit weight (╬│dтАЛ) of a soil sample is defined as the weight of solids per unit total volume of soil. Given the specific gravity (GsтАЛ) and the void ratio (e), the dry unit weight is calculated using the phase relationship formula considering the volume of voids.
╬│dтАЛ=1+eGsтАЛтЛЕ╬│wтАЛтАЛ тАФ Formula for dry unit weight
╬│dтАЛ=VWsтАЛтАЛ тАФ Fundamental definition of dry unit weight
The relationship between dry unit weight, specific gravity, and void ratio is derived from the basic definitions of phase diagrams. Since the soil is dry, the degree of saturation is zero, leading to the formula ╬│dтАЛ=1+eGsтАЛтЛЕ╬│wтАЛтАЛ.
Dry unit weight is independent of the water content when the total volume remains constant.
Higher void ratio (e) indicates a lower dry unit weight for a given specific gravity.
The value of GsтАЛ for inorganic soils typically ranges from 2.6 to 2.8.
Provides a direct measure of the density of soil solids.
Essential for calculating the degree of compaction in earthworks.
Does not account for the presence of water or air directly in its application to field moisture conditions.
Sensitive to accurate measurement of void ratio.
Foundation engineering for settlement analysis.
Compaction control in highway and embankment construction.
Calculation: ╬│dтАЛ=1+0.62.65├Ч9.81тАЛ=1.625.9965тАЛ=16.2478тЙИ16.25┬аkN/m3.
Option B is the correct calculation based on the standard soil mechanics phase relationship.
B is correct тАФ Using the formula ╬│dтАЛ=1+eGsтАЛтЛЕ╬│wтАЛтАЛ, the calculated dry unit weight is 16.25┬аkN/m3.
Always remember the relation ╬│dтАЛ=1+w╬│тАЛ. This is frequently combined with Se=wGsтАЛ in exam problems involving saturated or partially saturated soil.