Join 60,000+ competitive exam aspirants
A soil has volume of solids 0.35m3 and volume of voids 0.15m3. Find its porosity (%).
28.5%
30%
35%
40%
30%
Porosity is defined as the ratio of the volume of voids to the total volume of a soil sample. In this case, the total volume is the sum of the volume of solids and the volume of voids.
IS 2720 (Part 1): 1983
Porosity is defined as the ratio of the volume of voids to the total volume of a soil sample. In this case, the total volume is the sum of the volume of solids and the volume of voids.
╬╖=VsтАЛ+VvтАЛVvтАЛтАЛ├Ч100% тАФ Definition of porosity as a percentage
V=VsтАЛ+VvтАЛ тАФ Relation between total volume, solids, and voids
The total volume V is calculated as V=VsтАЛ+VvтАЛ. Given VsтАЛ=0.35m3 and VvтАЛ=0.15m3, the total volume is V=0.35+0.15=0.50m3. Porosity ╬╖ is then determined using the fundamental relation ╬╖=VVvтАЛтАЛ├Ч100%.
Porosity is always expressed as a percentage or a fraction less than 1.
The volume of solids (VsтАЛ) and volume of voids (VvтАЛ) together constitute the bulk volume of the soil.
Porosity must be distinguished from the void ratio (e=VsтАЛVvтАЛтАЛ).
Provides a direct indicator of the space available for fluid or gas in soil.
Essential for calculating permeability and seepage in geotechnical engineering.
Porosity does not provide information about the connectivity of the voids.
Values can change significantly upon compaction of the soil mass.
Determining the hydraulic conductivity of soil.
Calculating the degree of saturation in soil mechanics.
Calculated value: ╬╖=0.35+0.150.15тАЛ├Ч100=0.500.15тАЛ├Ч100=30%.
Option A is incorrect as it results from miscalculating the total volume denominator.
Option C uses VsтАЛ as the denominator (misinterpretation of the formula).
B is correct тАФ The porosity is calculated as the ratio of void volume to total volume, resulting in 30%.
Remember that while porosity ╬╖=VVvтАЛтАЛ is related to void ratio by ╬╖=1+eeтАЛ, always ensure you are using the total volume in the denominator for porosity calculations.