Join 60,000+ competitive exam aspirants
Creep is the gradual increase of strain in a material when subjected to:
Constant load and constant temperature
Varying load and constant temperature
Constant strain and varying load
Constant load and varying temperature
Constant load and constant temperature
Creep is the time-dependent permanent deformation of a material under a sustained load. It occurs when a material is subjected to a constant stress over an extended duration, especially at elevated temperatures relative to its melting point.
IS 456:2000 Cl. 6.2.5
Creep is the time-dependent permanent deformation of a material under a sustained load. It occurs when a material is subjected to a constant stress over an extended duration, especially at elevated temperatures relative to its melting point.
╧╡cтАЛ=EcтАЛ(t)╧ГтАЛ тАФ where ╧╡cтАЛ is creep strain, ╧Г is sustained stress, and EcтАЛ(t) is the time-dependent modulus of elasticity.
╬ж=Elastic┬аStrainCreep┬аStrainтАЛ тАФ where ╬ж is the creep coefficient.
Creep occurs due to the movement of dislocations within the crystalline structure and grain boundary sliding. Under constant stress, atoms migrate or diffuse through the material lattice, allowing the material to deform plastically over time without an increase in applied load.
Creep is highly dependent on the homologous temperature (T/TmтАЛ), where TmтАЛ is the melting point in Kelvin.
In reinforced concrete, creep leads to stress redistribution between steel and concrete.
The rate of creep typically follows a three-stage process: primary (transient), secondary (steady-state), and tertiary (accelerating).
Allows for stress relaxation in high-temperature components
Provides data for predicting the service life of engineering structures
Reduces the structural integrity of components over time
Leads to permanent deformation and eventual rupture
Design of turbine blades
Long-term structural monitoring of bridges and dams
Creep coefficient values are defined by IS 456 as 2.2, 1.6, and 1.1 at 7, 28, and 365 days of loading respectively.
Options B, C, and D are incorrect because creep specifically requires sustained stress (constant load) and constant thermal conditions to observe the time-dependent strain behavior accurately.
A is correct тАФ Creep is defined by the progressive increase in strain specifically under conditions of constant load and constant temperature.
Always remember that creep increases the effective stress on steel reinforcement in concrete beams, while it decreases the stress on the concrete itself.