Join 60,000+ competitive exam aspirants
For a given soil, if the void ratio increases, what happens to the porosity?
It increases
It decreases
It remains the same
It becomes zero
It increases
Void ratio (e) and porosity (n) are both indices used to express the relative density of soil, representing the proportion of voids within the soil mass. Because porosity is defined as the ratio of the volume of voids to the total volume of the soil, an increase in the volume of voids relative to the soil solids naturally leads to an increase in both e and n.
IS 2720-4:1985
Void ratio (e) and porosity (n) are both indices used to express the relative density of soil, representing the proportion of voids within the soil mass. Because porosity is defined as the ratio of the volume of voids to the total volume of the soil, an increase in the volume of voids relative to the soil solids naturally leads to an increase in both e and n.
e=VsтАЛVvтАЛтАЛ тАФ Void ratio as the ratio of volume of voids to volume of solids
n=VtтАЛVvтАЛтАЛ=VvтАЛ+VsтАЛVvтАЛтАЛ тАФ Porosity as the ratio of volume of voids to total volume
n=1+eeтАЛ тАФ Relationship between porosity and void ratio
e=1тИТnnтАЛ тАФ Void ratio in terms of porosity
The void ratio is defined as e=VsтАЛVvтАЛтАЛ, where VvтАЛ is the volume of voids and VsтАЛ is the volume of solids. Porosity is defined as n=VtтАЛVvтАЛтАЛ, where VtтАЛ is the total volume (VtтАЛ=VvтАЛ+VsтАЛ). By substitution, the relationship is n=1+eeтАЛ. Mathematically, since the derivative dednтАЛ=(1+e)21тАЛ is always positive, an increase in e must result in an increase in n.
Void ratio (e) can be greater than 1, whereas porosity (n) is always less than 1 (or 100%).
As the soil becomes looser, both e and n increase.
As the soil becomes denser through compaction, both e and n decrease.
The range of n is 0<n<1.
Porosity is useful for understanding fluid flow and permeability.
Void ratio is highly effective for calculating soil settlement and compressibility.
Neither parameter accounts for the actual size of the pores, only their volume.
Both require knowledge of particle density (G) for calculation in laboratory experiments.
Geotechnical site investigations for foundation design.
Hydrogeological studies to estimate groundwater storage capacity.
For typical soils, the void ratio e usually ranges between 0.3 and 1.5.
Option B is incorrect because porosity is directly proportional to void ratio; they move in the same direction.
Option C is incorrect because they are functionally dependent variables, not independent.
A is correct тАФ Porosity and void ratio are directly related such that an increase in void ratio mathematically necessitates an increase in porosity.
Always remember the formula n=1+eeтАЛ. If you forget it during an exam, derive it quickly by imagining a block with VsтАЛ=1 and VvтАЛ=e, then VtтАЛ=1+e.