Join 60,000+ competitive exam aspirants
A soil sample has a void ratio of 0.6. What is its porosity?
1
0.6
0.37
0.75
0.37
Porosity (n) is defined as the ratio of the volume of voids to the total volume of the soil sample. Given the void ratio (e=0.6), the porosity is calculated using the standard inter-relationship between these two soil properties.
IS 2720 (Part 1): 1983
Porosity (n) is defined as the ratio of the volume of voids to the total volume of the soil sample. Given the void ratio (e=0.6), the porosity is calculated using the standard inter-relationship between these two soil properties.
n=1+eeтАЛ тАФ Relationship between porosity and void ratio
e=1тИТnnтАЛ тАФ Relationship between void ratio and porosity
Void ratio (e) and porosity (n) represent the same physical characteristic of soil (the presence of voids) but use different reference volumes. While e is expressed with respect to the volume of solids, n is expressed with respect to the total volume. The conversion formula is derived from the definition n=VVvтАЛтАЛ and e=VsтАЛVvтАЛтАЛ, where V=VvтАЛ+VsтАЛ.
Void ratio (e) is always greater than or equal to porosity (n) for a given soil mass.
Porosity is expressed as a decimal or a percentage, where 0<n<1.
Void ratio (e) can be greater than 1 for loose soils.
Both e and n are dimensionless parameters.
Simple mathematical conversion
Fundamental for determining soil density and permeability
Porosity does not provide information about the grain size distribution.
Requires knowledge of either volume of solids or total volume to calculate.
Geotechnical site investigations
Determination of degree of saturation
Calculation of hydraulic conductivity
Calculation: n=1+0.60.6тАЛ=1.60.6тАЛ=0.375. Rounded to two decimal places, this is 0.37.
Option B (0.6) is incorrect as it is the value of the void ratio itself, not the porosity.
C is correct тАФ The porosity is calculated as n=1+eeтАЛ=1.60.6тАЛ=0.375тЙИ0.37.
Always remember the relation n=1+eeтАЛ. If you forget it, derive it using a phase diagram assuming Volume of Solids (VsтАЛ) as 1 unit.