Join 60,000+ competitive exam aspirants
In a soil specimen, 80% of particles pass through a 4.75┬аmm sieve, and 30% of particles pass through a 75-micron sieve. The uniformity coefficient is 12, and the coefficient of curvature is 2. As per IS classification, this soil is classified as:
SW
MH
OH
SC
SC
According to the Indian Standard Soil Classification System (ISSCS), if more than 50% of the soil passes through the 75-micron sieve, it is classified as fine-grained. Here, since only 30% passes the 75-micron sieve, it is coarse-grained. Among coarse-grained soils, if more than 50% of the coarse fraction passes the 4.75┬аmm sieve, it is classified as sand (S). Since 30% is finer than 75-micron (which is >12%), it falls under the classification of clayey sand (SC).
IS 1498:1970
According to the Indian Standard Soil Classification System (ISSCS), if more than 50% of the soil passes through the 75-micron sieve, it is classified as fine-grained. Here, since only 30% passes the 75-micron sieve, it is coarse-grained. Among coarse-grained soils, if more than 50% of the coarse fraction passes the 4.75┬аmm sieve, it is classified as sand (S). Since 30% is finer than 75-micron (which is >12%), it falls under the classification of clayey sand (SC).
CuтАЛ=D10тАЛD60тАЛтАЛ тАФ Uniformity coefficient
CcтАЛ=D10тАЛ├ЧD60тАЛ(D30тАЛ)2тАЛ тАФ Coefficient of curvature
The classification depends on the percentage of fines passing the 75-micron sieve. If the fraction of fines is between 5% and 12%, dual symbols are used. If the fraction of fines is greater than 12%, the soil is classified based on the plasticity of the fines (CL/ML). Given that 30% is greater than 12%, the soil is classified as a sandy soil with clayey fines, denoted by SC.
Coarse-grained soil: <50% passes 75-micron sieve.
Sand (S): >50% of coarse fraction passes 4.75┬аmm sieve.
Fines content >12% requires classification based on plasticity.
SC represents clayey sand.
Systematic identification of soil engineering behavior.
Standardized criteria for construction suitability.
Requires laboratory testing (sieve analysis and Atterberg limits).
Does not account for non-plastic fines in all classification sub-groups.
Foundation design and soil stabilization.
Road pavement and embankment construction.
Option A (SW) is for well-graded sand with <5% fines.
Option B (MH) is for elastic silt (fine-grained).
Option C (OH) is for organic clay (fine-grained).
D is correct тАФ Since the soil has more than 12% fines and belongs to the sand category, it is classified as SC (clayey sand).
Always check the percentage of fines (75-micron sieve) first; it dictates whether you classify as coarse-grained or fine-grained before looking at gradation curves.