Join 60,000+ competitive exam aspirants
For a reinforced concrete (RCC) beam with a width (b) of 200 mm and an effective depth (d) of 300 mm, constructed using M20 grade concrete and Fe415 grade steel, what is the value of the limiting moment of resistance (Mu,limтАЛ)?
40 kNm
50 kNm
60 kNm
70 kNm
50 kNm
The limiting moment of resistance for a singly reinforced beam is calculated based on the balanced section condition where concrete reaches its maximum strain of 0.0035 at the same time steel reaches its yield strain. For a given grade of concrete and steel, the moment is determined by the lever arm and the force of compression.
IS 456:2000, Annex G
The limiting moment of resistance for a singly reinforced beam is calculated based on the balanced section condition where concrete reaches its maximum strain of 0.0035 at the same time steel reaches its yield strain. For a given grade of concrete and steel, the moment is determined by the lever arm and the force of compression.
Mu,limтАЛ=Ru,limтАЛ├Чb├Чd2
Ru,limтАЛ=0.36├Чdxu,maxтАЛтАЛ├Ч(1тИТ0.42├Чdxu,maxтАЛтАЛ)├ЧfckтАЛ
The principle relies on the limit state design philosophy where the section reaches the ultimate limit state of collapse. The neutral axis depth factor (xu,maxтАЛ/d) for Fe415 steel is 0.48. By calculating the internal couple of compression force and lever arm distance, the limiting moment capacity is determined.
For Fe415, dxu,maxтАЛтАЛ=0.48.
For M20, fckтАЛ=20┬аN/mm2.
Formula calculation: Mu,limтАЛ=0.138├ЧfckтАЛ├Чb├Чd2 for Fe415.
Ensures ductile failure of the beam section.
Provides a standardized design limit for reinforced sections.
Does not account for the additional strength provided by compression steel in doubly reinforced sections.
Design of singly reinforced rectangular beams.
Determination of maximum reinforcement limits to ensure under-reinforced behavior.
Calculation: Mu,limтАЛ=0.138├Ч20├Ч200├Ч3002=24840000┬аNmm=24.84┬аkNm. Wait, checking standard coefficients: Mu,limтАЛ=0.36├Ч(0.48)├Ч(1тИТ0.42├Ч0.48)├Ч20├Ч200├Ч3002. Result тЙИ49.68┬аkNm, which rounds to 50 kNm.
Option B is the correct value based on the calculation 0.1389├Ч20├Ч200├Ч3002тЙИ50┬аkNm.
B is correct тАФ The limiting moment of resistance Mu,limтАЛ is approximately 50 kNm calculated using the balanced section parameters.
Always remember the xu,maxтАЛ/d ratios for different steel grades: 0.53 for Fe250, 0.48 for Fe415, and 0.46 for Fe500 to save time in exam calculations.