Join 60,000+ competitive exam aspirants
Which exposure class describes concrete surfaces protected from weather/aggressive conditions?
Moderate
Severe
Mild
Very severe
Mild
Concrete surfaces protected against weather or aggressive conditions fall under the 'Mild' exposure class as per IS 456:2000. This category applies to indoor concrete members that are not subjected to external weathering or chemicals.
IS 456:2000, Table 3
Concrete surfaces protected against weather or aggressive conditions fall under the 'Mild' exposure class as per IS 456:2000. This category applies to indoor concrete members that are not subjected to external weathering or chemicals.
w/c┬аratioтЙд0.45 тАФ Maximum water-cement ratio for severe exposure conditions
CminтАЛтЙе300┬аkg/m3 тАФ Minimum cement content for moderate exposure conditions
Exposure classes are defined based on the risk of corrosion of reinforcement and the degradation of concrete matrix. In 'Mild' conditions, the absence of moisture, chloride, or sulfate attack ensures minimal chemical activity, requiring the lowest grade of concrete and minimum cement content.
Mild exposure refers to concrete surfaces protected against weather or aggressive conditions.
Moderate exposure refers to concrete surfaces sheltered from severe rain or freezing while wet.
Very Severe exposure refers to concrete surfaces exposed to sea spray or corrosive fumes.
Durability requirements dictate the minimum cement content and maximum w/c ratio based on these exposure classes.
Economic efficiency by reducing cement usage for interior members.
Easier quality control for lower-grade concrete mixes.
Not suitable for external or structural elements exposed to moisture or pollutants.
Risk of durability failure if incorrectly applied to high-risk environments.
Internal building columns and beams.
Floor slabs not in contact with ground moisture.
Option A (Moderate) applies to surfaces sheltered from severe rain.
Option B (Severe) applies to surfaces exposed to alternate wetting and drying.
Option D (Very Severe) applies to surfaces exposed to sea water spray or corrosive atmosphere.
C is correct тАФ Mild exposure describes concrete surfaces that are protected from weather and aggressive environmental conditions.
Remember that IS 456 Table 3 classifies exposure into 5 categories: Mild, Moderate, Severe, Very Severe, and Extreme. Memorizing the hierarchy helps in quickly identifying the required minimum cement content and maximum water-cement ratio.