Join 60,000+ competitive exam aspirants
In open channel flow, which geometric condition must be met for a channel to be considered hydraulically most efficient (i.e., to carry the maximum discharge for a given cross-sectional area and slope)?
The hydraulic radius is maximized.
The Froude number is equal to 1.
The specific energy is minimized.
The velocity of flow is equal to the critical velocity.
The hydraulic radius is maximized.
A hydraulically most efficient channel, often called the best hydraulic section, is designed to carry the maximum discharge for a given area, slope, and roughness coefficient. This condition is physically achieved when the wetted perimeter is minimized, which consequently maximizes the hydraulic radius.
A hydraulically most efficient channel, often called the best hydraulic section, is designed to carry the maximum discharge for a given area, slope, and roughness coefficient. This condition is physically achieved when the wetted perimeter is minimized, which consequently maximizes the hydraulic radius.
Q=n1тАЛAR2/3S1/2 тАФ Manning's equation for discharge
R=PAтАЛ тАФ Hydraulic radius definition
P=Minimum тАФ Condition for maximum efficiency
According to the Manning's formula Q=n1тАЛAR2/3S1/2, for a fixed cross-sectional area A, slope S, and roughness n, the discharge Q is directly proportional to R2/3. Since the hydraulic radius R=PAтАЛ, maximizing R is equivalent to minimizing the wetted perimeter P. A minimized perimeter reduces frictional losses and wall resistance, allowing for optimal flow efficiency.
Most efficient section implies minimum wetted perimeter for a given area.
For a rectangular channel, the condition is b=2y (bottom width equals twice the depth).
For a trapezoidal channel, the best hydraulic section is a semi-hexagon.
For a circular channel, the best hydraulic section is a semi-circle.
Reduces the cost of excavation and lining due to smaller cross-sectional dimensions.
Maximizes the conveyance capacity of the channel.
May require complex geometry (like semicircles) which are harder to construct than standard trapezoidal sections.
Not always practical due to site constraints and land availability.
Design of irrigation canals.
Stormwater drain design.
Conveyance channels in water treatment plants.
Option B refers to critical flow condition which maximizes discharge for a given energy, not a given area.
Option C (Specific energy minimization) is the condition for critical flow, not for maximum efficiency at a fixed area.
Option D is synonymous with critical flow, which is independent of the 'most efficient' geometric requirement.
A is correct тАФ The hydraulically most efficient channel is defined by the condition that maximizes the hydraulic radius by minimizing the wetted perimeter.
Always remember: 'Most Efficient' = Minimum Perimeter, whereas 'Critical Flow' = Minimum Energy for a given discharge.