Join 60,000+ competitive exam aspirants
Which of the following is true regarding laminar flow in a pipe?
The velocity profile is parabolic
The flow is characterized by large swirling eddies
The Reynolds number is greater than 4000
The friction factor is constant and independent of Reynolds number
The velocity profile is parabolic
In fully developed laminar flow within a circular pipe, fluid particles move in smooth, parallel layers. Due to viscous effects and the no-slip condition at the wall, the velocity distribution across the cross-section follows a parabolic profile described by the Hagen-Poiseuille equation.
In fully developed laminar flow within a circular pipe, fluid particles move in smooth, parallel layers. Due to viscous effects and the no-slip condition at the wall, the velocity distribution across the cross-section follows a parabolic profile described by the Hagen-Poiseuille equation.
u(r)=UmaxтАЛ(1тИТR2r2тАЛ) тАФ Velocity distribution in laminar pipe flow
Re=╬╝╧БvDтАЛ тАФ Reynolds number calculation
f=Re64тАЛ тАФ Darcy-Weisbach friction factor for laminar flow
The laminar flow is dominated by viscous forces (Re<2000). The velocity gradient is linear with respect to shear stress, resulting in a parabolic distribution where velocity is zero at the pipe wall and maximum at the center axis.
Laminar flow occurs when Re<2000.
Transition flow occurs in the range 2000<Re<4000.
Turbulent flow occurs when Re>4000.
In laminar flow, the friction factor is inversely proportional to the Reynolds number.
Predictable pressure drop
Efficient heat transfer applications in low speed flows
Limited to very low velocity regimes
Inefficient mixing of fluids
Lubrication systems
Flow through capillary tubes
Blood flow in small arteries
Option B is incorrect because swirling eddies are characteristic of turbulent flow.
Option C is incorrect because Re>4000 defines turbulent flow, not laminar.
Option D is incorrect because the friction factor for laminar flow (f=64/Re) depends linearly on the inverse of the Reynolds number, not constant.
A is correct тАФ The velocity profile for fully developed laminar flow in a circular pipe is parabolic.
Always remember that for laminar flow, f=Re64тАЛ, meaning as velocity (and thus Re) increases, the friction factor decreases.