Join 60,000+ competitive exam aspirants
In which of the following cases does the flow in a pipe become fully developed?
When the velocity profile is fully formed and the flow is steady
When the pipe diameter increases significantly
When the Reynolds number is less than 2000
When the flow is unsteady
When the velocity profile is fully formed and the flow is steady
Fully developed flow occurs in a pipe when the velocity profile, once established, remains invariant in the direction of the flow. In this state, the shear stress distribution and the velocity profile across the pipe cross-section become independent of the axial distance x.
Fully developed flow occurs in a pipe when the velocity profile, once established, remains invariant in the direction of the flow. In this state, the shear stress distribution and the velocity profile across the pipe cross-section become independent of the axial distance x.
тИВxтИВuтАЛ=0 тАФ Velocity profile invariance along flow direction x for fully developed flow
LeтАЛтЙИ0.06├ЧRe├ЧD тАФ Entrance length for laminar flow in circular pipes
When a fluid enters a pipe, a boundary layer starts forming at the walls. As the flow progresses, these boundary layers merge at the center of the pipe. Once the boundary layer has grown to fill the entire pipe cross-section, the velocity profile stops changing along the length of the pipe, marking the transition to fully developed flow.
The region from the entrance to the point where flow becomes fully developed is called the hydrodynamic entrance region.
For laminar flow, the entrance length LeтАЛ is proportional to the Reynolds number (Re).
For turbulent flow, the entrance length is shorter and generally estimated as LeтАЛтЙИ10D to 60D.
Once the flow is fully developed, the pressure gradient dxdpтАЛ becomes constant.
Simplifies fluid mechanics calculations using the Hagen-Poiseuille equation for laminar flow.
Allows for predictable friction factor analysis using the Moody chart.
Does not account for transition or entry effects where velocity profiles are developing.
Assumes steady flow conditions which may not exist in pulsating pipe networks.
Design of piping systems for industrial fluid transport.
Calibration of flow meters requiring stable, developed velocity profiles.
Option B is incorrect because increasing pipe diameter changes the local Reynolds number, potentially disrupting fully developed flow.
Option C is incorrect because Re<2000 defines the laminar regime, but does not guarantee the flow is 'fully developed' unless the entrance length requirement is met.
Option D is incorrect as unsteady flow implies changes in velocity over time, which prevents the establishment of a stationary velocity profile.
A is correct тАФ A fully developed flow is characterized by a stable, non-varying velocity profile and steady state conditions along the longitudinal axis of the pipe.
Always remember that 'fully developed' refers to the spatial invariance of the velocity profile, whereas 'steady' refers to the temporal invariance of the flow.