Join 60,000+ competitive exam aspirants
The R.L. of point A is 100.0 m. If the backsight reading at point A is 2.0 m and the foresight reading at point B is 1.5 m, what is the R.L. of point B?
100.5 m
98.5 m
101.5 m
99.5 m
100.5 m
The Reduced Level (R.L.) of a point is calculated by first determining the Height of the Instrument (H.I.) and then subtracting the foresight reading from it. Given the R.L. of point A (100.0 m) and a backsight (B.S.) of 2.0 m, the H.I. is established as 102.0 m. Subtracting the foresight (F.S.) of 1.5 m from the H.I. gives the R.L. of point B as 100.5 m.
The Reduced Level (R.L.) of a point is calculated by first determining the Height of the Instrument (H.I.) and then subtracting the foresight reading from it. Given the R.L. of point A (100.0 m) and a backsight (B.S.) of 2.0 m, the H.I. is established as 102.0 m. Subtracting the foresight (F.S.) of 1.5 m from the H.I. gives the R.L. of point B as 100.5 m.
H.I.=R.L.┬аof┬аPoint┬аA+B.S.
R.L.┬аof┬аPoint┬аB=H.I.тИТF.S.
In leveling, the Height of Instrument method is used to find the elevation of points. The backsight is taken on a point of known elevation to establish the level plane of the line of sight. Subtracting the subsequent foresight from this H.I. yields the elevation of the new point.
Backsight is the first reading taken after the instrument is set up to determine the line of collimation.
Foresight is the last reading taken from an instrument setup before moving the instrument.
The Height of Instrument (H.I.) remains constant for all intermediate sights taken from the same setup.
Simple calculations
Easy to check the arithmetic using the sum of sights
No intermediate check on R.L. of intermediate points
Errors can propagate if intermediate sight calculations are incorrect
Road profiling
Topographic surveying
Calculations: 100.0+2.0=102.0 m (H.I.); 102.0тИТ1.5=100.5 m (R.L. of B).
Option B (98.5 m) is incorrect as it results from subtracting B.S. and adding F.S. incorrectly.
Option C (101.5 m) is incorrect as it represents the sum of the R.L. and the F.S. minus the B.S.
A is correct тАФ The R.L. of point B is determined by subtracting the foresight from the established height of the instrument.
Always remember that in leveling, H.I. is the elevation of the line of collimation above the datum, not the ground level.