Join 60,000+ competitive exam aspirants
The term "offset" in surveying refers to:
A Circular measurement
A vertical measurement
A short distance measured from a chain line to a point
An angular measurement
A short distance measured from a chain line to a point
An offset in surveying is a lateral distance measured from the chain line to locate objects, features, or details on the ground. These measurements are essential for preparing a plan when the object of interest does not lie directly on the main survey line.
IS 1491: 1959 (Code of practice for setting out of buildings)
An offset in surveying is a lateral distance measured from the chain line to locate objects, features, or details on the ground. These measurements are essential for preparing a plan when the object of interest does not lie directly on the main survey line.
d=l2+o2тАЛ тАФ where d is the distance to an object using oblique offset, l is the distance along the chain line, and o is the offset length.
omaxтАЛ=201тАЛ├Чscale┬аof┬аmap тАФ recommended limit for offset length to maintain accuracy.
Offsets are taken at right angles (perpendicular) to the chain line for maximum accuracy in plotting. If an object is not exactly perpendicular, an oblique offset is measured, though this requires two measurements to fix the position of the point by intersecting arcs during plotting.
Offsets are primarily classified into Perpendicular and Oblique offsets.
Perpendicular offsets are quicker to measure and easier to plot than oblique offsets.
The length of an offset should be limited to ensure high precision in field mapping.
Instruments like optical square or cross-staff are used to set out perpendicular offsets.
Allows for the inclusion of minor details without altering the main survey line.
Provides a simple and cost-effective method for site localization.
Longer offsets increase the risk of errors in measurement and plotting.
Accumulation of errors in perpendicularity can lead to misalignment in the final map.
Mapping of building corners and boundary walls.
Locating features like trees, fences, and utility poles relative to a baseline.
Perpendicular offsets are taken at 90┬░ to the chain line.
Option A is incorrect because surveying uses linear and angular measurements separately.
Option B is incorrect because offsets are typically horizontal measurements in chain surveying.
Option D is incorrect because offsets specifically refer to distances, not angles.
C is correct тАФ An offset is defined as a short lateral distance measured from the survey chain line to an object to plot its position.
In exams, remember that for accurate mapping, the length of the offset should be as small as possible to minimize the accumulation of errors.