Join 60,000+ competitive exam aspirants
In plane table surveying, the intersection method is used to:
Determine the location of a point from two known points
Determine the location of a point from three known points
Measure the distance between two points
Measure the height of a point
Determine the location of a point from two known points
The intersection method in plane table surveying is a technique used to locate a point on the ground by drawing rays from two or more accessible stations (known points) whose positions are already plotted on the drawing sheet.
The intersection method in plane table surveying is a technique used to locate a point on the ground by drawing rays from two or more accessible stations (known points) whose positions are already plotted on the drawing sheet.
dPтАЛ=Base├Чsin(╬▒+╬▓)sin(╬▒)sin(╬▓)тАЛ
╬Ф=Angle┬аof┬аintersection
The principle is based on the concept of 'graphical triangulation'. By orienting the table at two known stations A and B, rays are drawn towards the object point P. The point of intersection of these rays on the plane table defines the exact position of point P relative to the baseline AB.
Used primarily when the point to be located is inaccessible or difficult to reach.
Requires only two station points to determine the third location.
Eliminates the need for linear measurement of the distance to the point P.
Also known as the 'resection' or 'trigonometric location' approach in specific contexts.
Ideal for locating inaccessible points like river banks or mountain peaks.
Highly suitable for small-scale mapping.
Reduces errors in linear measurement.
Accuracy depends significantly on the strength of the angle of intersection.
Requires clear line-of-sight between the stations and the object point.
Slow process compared to radiation method for accessible points.
Topographic surveys of rough or hilly terrain.
Locating inaccessible points such as chimneys, towers, or islands.
The intersection method is most accurate when the angle of intersection is between 60┬░ and 120┬░. Angles less than 30┬░ or greater than 150┬░ lead to poor precision.
Option B refers to 'Resection' or 'Three-point problem', not the standard Intersection method.
A is correct тАФ The intersection method uses rays from two known stations to fix the location of an object point by their graphical intersection.
Always remember that 'Intersection' is for plotting points, while 'Resection' (often involving three points) is for orienting the plane table relative to the known station.