Join 60,000+ competitive exam aspirants
Which of the following is the main advantage of using a plane table for surveying?
It is accurate for long-distance measurements
It allows direct plotting of the survey details
It requires minimal setup time
It is suitable for measuring elevations
It allows direct plotting of the survey details
The main advantage of plane table surveying is the simultaneous observation and plotting of survey features. This allows the surveyor to verify the accuracy of the work immediately in the field, reducing the probability of errors and omissions.
The main advantage of plane table surveying is the simultaneous observation and plotting of survey features. This allows the surveyor to verify the accuracy of the work immediately in the field, reducing the probability of errors and omissions.
E=21тАЛтЛЕkтЛЕsтЛЕsin(2╬╕) тАФ typical horizontal distance calculation in tacheometric plane table survey where k is the stadia interval factor, s is the staff intercept, and ╬╕ is the inclination angle.
The principle of plane table surveying is based on the concept of 'parallelism', where the rays drawn on the drawing sheet are always parallel to the lines of sight on the ground. By using an alidade, the surveyor sights the object and draws a ray along the line of sight, allowing for graphical triangulation or radiation on the table.
Plane table surveying is a graphical method of survey.
It is highly suitable for large-scale mapping.
The survey and plotting occur concurrently, eliminating office plotting errors.
It requires good weather conditions as it is an outdoor graphical process.
Direct plotting of details reduces errors.
No notes are required since drawing is done on the field.
Suitable for small scale and medium scale mapping.
It is a rapid method compared to field book methods.
Not suitable for precise or long-distance survey.
Requires stable climatic conditions; cannot be done in rain or strong wind.
Instrument is bulky and cumbersome to transport in rough terrain.
Difficult to store the plan (drawing sheet) while on field.
Topographical mapping
Filling in details between triangulation stations
Urban planning and residential layouts
Option A is incorrect because plane table is not intended for long-distance/high-accuracy surveys.
Option C is incorrect because the setup involving leveling and orientation is time-consuming compared to modern total stations.
Option D is incorrect as elevation measurement is limited to basic clinometer or stadia methods and is not the primary purpose.
B is correct тАФ The defining advantage of plane table surveying is the ability to perform field observations and plotting simultaneously.
In SSC JE exams, remember that plane table survey is the only method where 'surveying' and 'plotting' occur at the same time and place, which distinguishes it from chain or compass surveying.